// $Header: $
// $NoKeywords: $
//
//      AutoCAD 2000 Menu
//      28 April 1997
//
//      Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1994, 1996, 1997, 1998
//      by Autodesk, Inc.
//
//      Permission to use, copy, modify, and distribute this software
//      for any purpose and without fee is hereby granted, provided that
//      the above copyright notice appears in all copies and that both
//      the copyright notice and the limited warranty and restricted rights
//      notice below appear in all supporting documentation.
//
//      AUTODESK, INC. PROVIDES THIS PROGRAM "AS IS" AND WITH ALL FAULTS.
//      AUTODESK, INC. SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF
//      MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE.  AUTODESK, INC.
//      DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE
//      UNINTERRUPTED OR ERROR FREE.
//
//      Use, duplication, or disclosure by the U.S. Government is subject to
//      restrictions set forth in FAR 52.227-19 (Commercial Computer
//      Software - Restricted Rights) and DFAR 252.227-7013(c)(1)(ii)
//      (Rights in Technical Data and Computer Software), as applicable.
//
//
//      NOTE:  AutoCAD looks for an ".mnl" (Menu Lisp) file whose name is
//             the same as that of the menu file, and loads it if
//             found.  If you modify this menu and change its name, you
//             should copy acad.mnl to <yourname>.mnl, since the menu
//             relies on AutoLISP routines found there.
//

//
//      Default AutoCAD NAMESPACE declaration:
//
***MENUGROUP=ACADPHIL

//
//   Begin AutoCAD Digitizer Button Menus
//
***BUTTONS1
// Simple + button
// if a grip is hot bring up the Grips Cursor Menu (POP 500), else send a carriage return
// If the SHORTCUTMENU sysvar is not 0 the first item (for button 1) is NOT USED.
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,5),GRIP_),$P0=ACAD.GRIPS $P0=*);
$P0=SNAP $p0=*
^C^C
^B
^O
^G
^D
^E
^T

***BUTTONS2
// Shift + button
$P0=SNAP $p0=*

***BUTTONS3
// Control + button

***BUTTONS4
// Control + shift + button

//
//   Begin System Pointing Device Menus
//
***AUX1
// Simple button
// if a grip is hot bring up the Grips Cursor Menu (POP 500), else send a carriage return
// If the SHORTCUTMENU sysvar is not 0 the first item (for button 1, the "right button")
// is NOT USED.
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,5),GRIP_),$P0=ACAD.GRIPS $P0=*);
$P0=SNAP $p0=*
^C^C
^B
^O
^G
^D
^E
^T


***AUX2
// Shift + button
$P0=SNAP $p0=*
$P0=SNAP $p0=*

***AUX3
// Control + button
$P0=SNAP $p0=*

***AUX4
// Control + shift + button
$P0=SNAP $p0=*

//
//   Begin AutoCAD Pull-down Menus
//
***POP0
**SNAP
// Shift-right-click if using the default AUX2 and/or BUTTONS2
// menus.
             [&Object Snap Cursor Menu]
ID_Tracking  [Temporary trac&k point]_tt
ID_From      [&From]_from
ID_MnPointFi [->Poin&t Filters]
ID_PointFilx   [.X].X
ID_PointFily   [.Y].Y
ID_PointFilz   [.Z].Z
			   [--]
ID_PointFixy   [.XY].XY
ID_PointFixz   [.XZ].XZ
ID_PointFiyz   [<-.YZ].YZ
             [--]
ID_OsnapEndp [&Endpoint]_endp
ID_OsnapMidp [&Midpoint]_mid
ID_OsnapInte [&Intersection]_int
ID_OsnapAppa [&Apparent Intersect]_appint
ID_OsnapExte [E&xtension]_ext
             [--]
ID_OsnapCent [&Center]_cen
ID_OsnapQuad [&Quadrant]_qua
ID_OsnapTang [Tan&gent]_tan
             [--]
ID_OsnapPerp [&Perpendicular]_per
ID_OsnapPara [Para&llel]_par
ID_OsnapNode [No&de]_nod
ID_OsnapInse [In&sert]_ins
ID_OsnapNear [Nea&rest]_nea
ID_OsnapNone [&None]_non
             [--]
ID_Osnap     [&Osnap Settings...]'_+dsettings 2


***POP1
**FILE
ID_MnFile    [&File]
ID_New       [&New...\tCtrl+N]^C^C_new
ID_Open      [&Open...\tCtrl+O]^C^C_open
ID_FILE_CLOSE [&Close]
ID_PartialOp [$(if,$(eq,$(getvar,fullopen),0),,~)Pa&rtial Load]^C^C_partiaload
             [--]
ID_Save      [&Save\tCtrl+S]^C^C_qsave
ID_Saveas    [Save &As...]^C^C_saveas
ID_Export    [&Export...]^C^C_export
             [--]
ID_PlotSetup [Pa&ge Setup...]^C^C_pagesetup
ID_PlotMgr   [Plotter &Manager...]^C^C_plottermanager
ID_PlotStyMgr [Plot St&yle Manager...]^C^C_stylesmanager
ID_Preview   [Plot Pre&view]^C^C_preview
ID_Print     [&Plot...\tCtrl+P]^C^C_plot
             [--]
ID_MnDrawing [->Drawing &Utilities]
ID_Audit       [&Audit]^C^C_audit
ID_Recover     [&Recover...]^C^C_recover
               [--]
ID_MnPurge     [->&Purge]
ID_PurgeAll      [&All]^C^C_purge _a
                 [--]
ID_PurgeLay      [&Layers]^C^C_purge _la
ID_PurgeLin      [Li&netypes]^C^C_purge _lt
ID_PurgeTxt      [&Text Styles]^C^C_purge _st
ID_PurgeDim      [&Dimension Styles]^C^C_purge _d
ID_PurgeMln      [&Multiline Styles]^C^C_purge _m
ID_PurgeBlk      [&Blocks]^C^C_purge _b
ID_PurgePlt      [&Plot Styles]^C^C_purge _p
ID_PurgeShp      [<-<-&Shapes]^C^C_purge _sh
ID_SendMail  [Sen&d...]
ID_Props     [Drawing Propert&ies...]^C^C_dwgprops
             [--]
ID_MRU       [Drawing History]
             [--]
ID_APP_EXIT  [E&xit]

***POP2
**EDIT
ID_MnEdit    [&Edit]
ID_U         [&Undo\tCtrl+Z]^C^C_u
ID_Redo      [&Redo\tCtrl+Y]^C^C_redo
             [--]
ID_Cutclip   [Cu&t\tCtrl+X]^C^C_cutclip
ID_Copyclip  [&Copy\tCtrl+C]^C^C_copyclip
ID_Copybase  [Copy with &Base Point]^C^C_copybase
ID_Copylink  [Copy &Link]^C^C_copylink
ID_Pasteclip [&Paste\tCtrl+V]^C^C_pasteclip
ID_Pastebloc [Paste as Bloc&k]^C^C_pasteblock
ID_Pastehlnk [Paste as &Hyperlink]^C^C_pasteashyperlink
ID_Pasteorig [Paste to Original Coor&dinates]^C^C_pasteorig
ID_Pastesp   [Paste &Special...]^C^C_pastespec
ID_Erase     [Cle&ar\tDel]^C^C_erase
             [--]
ID_Links     [&OLE Links...]^C^C_olelinks
             [--]
ID_TextFind  [&Find...]^C^C_find

***POP3
**VIEW
ID_MnView    [&View]
ID_Redrawall [&Redraw]'_redrawall
ID_Regen     [Re&gen]^C^C_regen
ID_Regenall  [Regen &All]^C^C_regenall
             [--]
ID_MnZoom    [->&Zoom]
ID_ZoomRealt   [&Realtime]'_zoom ;
               [--]
ID_ZoomPrevi   [&Previous]'_zoom _p
ID_ZoomWindo   [&Window]'_zoom _w
ID_ZoomDynam   [&Dynamic]'_zoom _d
ID_ZoomScale   [&Scale]'_zoom _s
ID_ZoomCente   [&Center]'_zoom _c
               [--]
ID_ZoomIn      [&In]'_zoom 2x
ID_ZoomOut     [&Out]'_zoom .5x
               [--]
ID_ZoomAll     [&All]'_zoom _all
ID_ZoomExten   [<-&Extents]'_zoom _e
ID_MnPan     [->&Pan]
ID_Pan         [Real &Time]'_pan
ID_PanPick     [&Point]'_-pan
               [--]
ID_PanLeft     [&Left]^P'_-pan (trans (list (* -0.2 (getvar "viewsize")) 0) 0 1) ;^P
ID_PanRight    [&Right]^P'_-pan (trans (list (* 0.2 (getvar "viewsize")) 0) 0 1) ;^P
ID_PanUp       [&Up]^P'_-pan (trans (list 0 (* 0.2 (getvar "viewsize"))) 0 1) ;^P
ID_PanDown     [<-&Down]^P'_-pan (trans (list 0 (* -0.2 (getvar "viewsize"))) 0 1) ;^P
ID_Dsviewer  [Aerial Vie&w]'_dsviewer
             [--]
ID_MnTiledVi [->&Viewports]
ID_Ai_tiledv   [&Named Viewports...]^C^C_+vports 1
               [--]						   
ID_VportsSav   [N&ew Viewports...]^C^C_+vports 0
ID_VportsSin   [&1 Viewport]^C^C$M=$(if,$(eq,$(getvar,tilemode),1),^C^C_-vports _si,^C^C_-vports)
ID_Vports2     [&2 Viewports]^C^C_-vports _2
ID_Vports3     [&3 Viewports]^C^C_-vports _3
ID_Vports4     [&4 Viewports]^C^C_-vports _4
ID_VportsRes   [$(if,$(eq,$(getvar,tilemode),1),~)&Polygonal Viewport]^C^C_-vports _p
ID_VportsDel   [$(if,$(eq,$(getvar,tilemode),1),~)&Object]^C^C_-vports _o
               [--] 
ID_VportsJoi   [<-$(if,$(eq,$(getvar,tilemode),0),~)&Join]^C^C_-vports _j
ID_Ddview    [&Named Views...]^C^C_view
ID_MnViewpoi [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)&3D Views]
ID_Ddvpoint    [V&iewpoint Presets...]^C^C_ddvpoint
ID_VpointTri   [&VPOINT]^C^C_vpoint ;
ID_MnPlanView  [->&Plan View]
ID_PlanCurre     [&Current UCS]^C^C_plan ;
ID_PlanWorld     [&World UCS]^C^C_plan _w
ID_PlanUCS       [<-&Named UCS]^C^C_plan _u
               [--]
ID_VpointTop   [&Top]^C^C_-view _top
ID_VpointBot   [&Bottom]^C^C_-view _bottom
ID_VpointLef   [&Left]^C^C_-view _left
ID_VpointRig   [&Right]^C^C_-view _right
ID_VpointFro   [&Front]^C^C_-view _front
ID_VpointBac   [Bac&k ]^C^C_-view _back
               [--]
ID_VpointSW    [&SW Isometric]^C^C_-view _swiso
ID_VpointSE    [S&E Isometric]^C^C_-view _seiso
ID_VpointNE    [&NE Isometric]^C^C_-view _neiso
ID_VpointNW    [<-N&W Isometric]^C^C_-view _nwiso
ID_3dorbit     [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)3D Or&bit]^C^C_3dorbit
             [--]
ID_Hide      [&Hide]^C^C_hide
ID_MnPersShad   [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)&Shade]
ID_2doptim     [&2D Wireframe]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _2)
ID_Wireframe   [&3D Wireframe]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _3)
ID_Hidden      [&Hidden]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _h)
ID_Flat        [&Flat Shaded]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _f)
ID_Gouraud     [&Gouraud Shaded]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _g)
ID_FlatEdges   [Fla&t Shaded, Edges On]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _l)
ID_GourEdges   [<-Gouraud &Shaded, Edges On]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _o)
ID_MnRender  [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)R&ender]
ID_Render      [&Render...]^C^C_render
               [--]
ID_Scene       [&Scene...]^C^C_scene
ID_Light       [&Light...]^C^C_light
ID_Rmat        [&Materials...]^C^C_rmat
ID_Matlib      [Materials Librar&y...]^C^C_matlib
ID_Setuv       [M&apping...]^C^C_setuv
               [--]
ID_Backgroun   [&Background...]^C^C_background
ID_Fog         [&Fog...]^C^C_fog
ID_Lsnew       [Landscape &New...]^C^C_lsnew
ID_Lsedit      [Landscape &Edit...]^C^C_lsedit
ID_Lslib       [Lands&cape Library...]^C^C_lslib
               [--]
ID_Rpref       [&Preferences...]^C^C_rpref
ID_Stats       [<-S&tatistics...]^C^C_stats
             [--]
ID_MnDisplay [->Disp&lay]
ID_MnUCSicon   [->&UCS Icon]
ID_UcsiconOn     [$(if,$(and,$(getvar,ucsicon),1),!.)&On]$M=$(if,$(and,$(getvar,ucsicon),1),^C^C_ucsicon _off,^C^C_ucsicon _on)
ID_UcsiconOr     [<-$(if,$(and,$(getvar,ucsicon),2),!.)O&rigin]$M=$(if,$(and,$(getvar,ucsicon),2),^C^C_ucsicon _no,^C^C_ucsicon _or)
ID_MnAttribu   [->&Attribute Display]
ID_AttdispNo     [$(if,$(eq,$(getvar,attmode),1),!.)&Normal]'_attdisp _n
                 [--]
ID_AttdispOn     [$(if,$(eq,$(getvar,attmode),2),!.)&On]'_attdisp _on
ID_AttdispOf     [<-$(if,$(eq,$(getvar,attmode),0),!.)O&ff]'_attdisp _off
               [--]
ID_Textscr     [<-&Text Window\tF2]'_textscr
ID_Toolbar   [T&oolbars...]^C^C_toolbar

***POP4
**INSERT
ID_MnInsert  [&Insert]
ID_Ddinsert  [&Block...]^C^C_insert
ID_Xattach   [E&xternal Reference...]^C^C_xattach
ID_Imageatta [Raster &Image...]^C^C_imageattach
             [--]
ID_MnLayout  [->&Layout]
ID_NewLayout  [&New Layout]^C^C_layout _new
ID_TmplLayou  [Layout from &Template...]^C^C_layout _template
ID_LayoutWiz  [<-Layout &Wizard]^C^C_layoutwizard
             [--]
ID_3dsin     [&3D Studio...]^C^C_3dsin
ID_Acisin    [&ACIS File...]^C^C_acisin
ID_Dxbin     [Drawing &Exchange Binary...]^C^C_dxbin
ID_Wmfin     [&Windows Metafile...]^C^C_wmfin
ID_Insertobj [&OLE Object...]^C^C_insertobj
             [--]
ID_Xref      [X&ref Manager...]^C^C_xref
ID_Image     [I&mage Manager...]^C^C_image
             [--]
ID_Hyperlink [&Hyperlink...\tCtrl+K]^C^C_hyperlink

***POP5
**FORMAT
ID_MnFormat  [F&ormat]
ID_Layer     [&Layer...]'_layer
ID_Ddcolor   [&Color...]'_color
ID_Linetype  [Li&netype...]'_linetype
ID_Linewt    [Line&weight...]'_lweight
             [--]
ID_Style     [Text &Style...]'_style
ID_Ddim      [&Dimension Style...]'_dimstyle
ID_PlotStyle [$(if,$(eq,$(getvar,pstylemode),1),~,)Plot St&yle...]^C^C_plotstyle
ID_Ddptype   [&Point Style...]'_ddptype
ID_Mlstyle   [&Multiline Style...]^C^C_mlstyle
             [--]
ID_Units     [&Units...]'_units
ID_Thickness [&Thickness]'_thickness
ID_Limits    [Dr&awing Limits]'_limits
             [--]
ID_Ddrename  [&Rename...]^C^C_rename

***POP6
**TOOLS
ID_MnTools   [&Tools]
ID_Spell     [Sp&elling]'_spell
ID_Qselect   [&Quick Select...]^C^C_qselect
ID_MnOrder   [->Display &Order]
ID_DrawordeF   [Bring to &Front]^C^C^P(ai_draworder "_f") ^P
ID_DrawordeB   [Send to &Back]^C^C^P(ai_draworder "_b") ^P
               [--]
ID_DrawordeA   [Bring &Above Object]^C^C^P(ai_draworder "_a") ^P
ID_DrawordeU   [<-Send &Under Object]^C^C^P(ai_draworder "_u") ^P
ID_Inquiry   [->Inquir&y]
ID_Dist        [&Distance]'_dist
ID_Area        [&Area]^C^C_area
ID_Massprop    [&Mass Properties]^C^C_massprop
               [--]
ID_List        [&List]^C^C_list
ID_Id          [&ID Point]'_id
               [--]
ID_Time        [&Time]'_time
ID_Status      [&Status]'_status
ID_Setvar      [<-Set &Variable]'_setvar
             [--]
ID_Modify      [$(if,$(and,$(getvar,opmstate),1),!.)&Properties\tCtrl+1]$M=$(if,$(and,$(getvar,opmstate),1),^C^C_propertiesclose,^C^C_properties)
ID_Content     [$(if,$(and,$(getvar,adcstate),1),!.)&AutoCAD DesignCenter\tCtrl+2]$M=$(if,$(and,$(getvar,adcstate),1),'_adcclose,'_adcenter)
ID_dbConnect   [$(if,$(and,$(getvar,dbcstate),1),!.)&dbConnect\tCtrl+6]$M=$(if,$(and,$(getvar,dbcstate),1),^C^C_dbcClose,^C^C_dbConnect)
             [--]
ID_Appload   [&Load Application...]^C^C_appload
ID_Script    [&Run Script...]'_script
ID_VBAMacro  [->&Macro]
ID_VBARun      [&Macros...\tAlt+F8]^C^C_vbarun
ID_VBALoad     [&Load Project...]^C^C_vbaload
ID_VBAMan      [&VBA Manager...]^C^C_vbaman
             [--]
ID_VBAIDE      [<-Visual &Basic Editor \tAlt+F11]^C^C_vbaide
ID_AutoLisp  [->AutoLI&SP]
ID_AULPLoad    [&Load...]^C^C_appload
ID_AULPIDE     [<-&Visual LISP Editor]^C^C_vlide
             [--]
ID_MnImage   [->D&isplay Image]
ID_Replay      [&View...]^C^C_replay
ID_Saveimg     [<-&Save...]^C^C_saveimg
             [--]
ID_Dducs       [Named &UCS...]^C^C_+ucsman 0

ID_UcsOrtho   [->Ort&hographic UCS]
ID_Dducsp      [&Preset...]^C^C_+ucsman 1
ID_UcsTop      [&Top]^C^C_ucs _g _t
ID_UcsBottom   [&Bottom]^C^C_ucs _g _b
ID_UcsLeft     [&Left]^C^C_ucs _g _l
ID_UcsRight    [&Right]^C^C_ucs _g _r
ID_UcsFront    [&Front]^C^C_ucs _g _f
ID_UcsBack     [<-Bac&k]^C^C_ucs _g _ba
 
ID_UcsMove     [Mo&ve UCS]^C^C_ucs _move
ID_MnUCS     [->Ne&w UCS]
ID_UcsWorld    [&World]^C^C_ucs _w
ID_UcsObject   [&Object]^C^C_ucs _ob
ID_UcsFace	   [&Face]^C^C_ucs _fa	
ID_UcsView     [&View]^C^C_ucs _v
               [--]
ID_UcsOrigin   [Origi&n]^C^C_ucs _o
ID_UcsZAxVec   [Z &Axis Vector]^C^C_ucs _zaxis
ID_Ucs3point   [&3 Point]^C^C_ucs _3
               [--]
ID_UcsXAxRot   [&X]^C^C_ucs _x
ID_UcsYAxRot   [&Y]^C^C_ucs _y
ID_UcsZAxRot   [&Z]^C^C_ucs _z
             [--]
ID_UcsApply    [<-A&pply]^C^C_ucs _apply
             [--]
ID_Wizard      [->Wi&zards]
ID_AddPlotter    [Add &Plotter...]^C^C^P(if(startapp "addplwiz.exe")(princ)) ^P
ID_AddPlStyle    [Add Plot &Style Table....]^C^C^P(if(startapp "styshwiz.exe")(princ)) ^P
ID_PenSetting    [$(if,$(eq,$(getvar,pstylemode),1),Add Color-&Dependent Plot Style Table...,Add &Named Plot Style Table...)]^C^C_r14penwizard
                 [--]
ID_CreateLayout  [&Create Layout...]^C^C_layoutwizard 
ID_ImpPlotSet  [<-&Import R14 Plot Settings...]^C^C_pcinwizard

ID_Ddrmodes  [Dra&fting Settings...]'_dsettings
ID_MnTablet  [->&Tablet]
ID_TabletOn    [$(if,$(getvar,tabmode),!.)&On]^C^C_tablet _on
ID_TabletOff   [$(if,$(eq,$(getvar,tabmode),0),!.)O&ff]^C^C_tablet _off
               [--]
ID_TabletCal   [&Ca&librate]^C^C_tablet _cal
ID_TabletCfg   [<-Co&nfigure]^C^C_tablet _cfg
ID_Menuload  [&Customize Menus...]^C^C_menuload
ID_Preferenc [Optio&ns...]^C^C_options

***POP7
**DRAW
ID_MnDraw    [&Draw]
ID_Line      [&Line]^C^C_line
ID_Ray       [&Ray]^C^C_ray
ID_Xline     [Cons&truction Line]^C^C_xline
ID_Mline     [&Multiline]^C^C_mline
             [--]
ID_Pline     [&Polyline]^C^C_pline
ID_3dpoly    [&3D Polyline]^C^C_3dpoly
ID_Polygon   [Pol&ygon]^C^C_polygon
ID_Rectang   [Rectan&gle]^C^C_rectang
             [--]
ID_MnArc     [->&Arc]
ID_Arc3point   [3 &Points]^C^C_arc
               [--]
ID_ArcStCeEn   [&Start, Center, End]^C^C_arc \_c
ID_ArcStCeAn   [S&tart, Center, Angle]^C^C_arc \_c \_a
ID_ArcStCeLe   [St&art, Center, Length]^C^C_arc \_c \_l
               [--]
ID_ArcStEnAg   [Start, E&nd, Angle]^C^C_arc \_e \_a
ID_ArcStEnDi   [Start, End, &Direction]^C^C_arc \_e \_d
ID_ArcStEnRa   [Start, End, &Radius]^C^C_arc \_e \_r
               [--]
ID_ArcCeStEn   [&Center, Start, End]^C^C_arc _c
ID_ArcCeStAn   [C&enter, Start, Angle]^C^C_arc _c \\_a
ID_ArcCeStLe   [Center, Start, &Length]^C^C_arc _c \\_l
               [--]
ID_ArcContin   [<-C&ontinue]^C^C_arc ;
ID_MnCircle  [->&Circle]
ID_CircleRad   [Center, &Radius]^C^C_circle
               [--]
ID_Circle2pt   [&2 Points]^C^C_circle _2p
ID_Circle3pt   [&3 Points]^C^C_circle _3p
               [--]
ID_CircleTTR   [&Tan, Tan, Radius]^C^C_circle _ttr
ID_CircleTTT   [<-T&an, Tan, Tan]^C^C_circle _3p _tan \_tan \_tan \
ID_Donut     [&Donut]^C^C_donut
ID_Spline    [&Spline]^C^C_spline
ID_MnEllipse [->&Ellipse]
ID_EllipseCe   [&Center]^C^C_ellipse _c
ID_EllipseAx   [Axis, &End]^C^C_ellipse
               [--]
ID_EllipseAr   [<-&Arc]^C^C_ellipse _a
             [--]
ID_MnBlock   [->Bloc&k]
ID_Bmake       [&Make...]^C^C_block
               [--]
ID_Base        [&Base]'_base
ID_Attdef    [<-&Define Attributes...]^C^C_attdef
ID_MnPoint   [->P&oint]
ID_PointSing   [&Single Point]^C^C_point
ID_PointMult   [Multiple &Point]*^C^C_point
               [--]
ID_Divide      [&Divide]^C^C_divide
ID_Measure     [<-&Measure]^C^C_measure
             [--]
ID_Bhatch    [&Hatch...]^C^C_bhatch
ID_Boundary  [&Boundary...]^C^C_boundary
ID_Region    [Regio&n]^C^C_region
             [--]
ID_MnText    [->Te&xt]
ID_Mtext       [&Multiline Text...]^C^C_mtext
ID_Dtext       [<-&Single Line Text]^C^C_dtext
             [--]
ID_MnSurface [->Sur&faces]
ID_Solid       [&2D Solid]^C^C_solid
ID_3dface      [3D &Face]^C^C_3dface
ID_3dsurface   [&3D Surfaces...]$I=ACAD.image_3dobjects $I=ACAD.*
               [--]
ID_Edge        [&Edge]^C^C_edge
ID_3dmesh      [3D &Mesh]^C^C_3dmesh
               [--]
ID_Revsurf     [Revolved &Surface]^C^C_revsurf
ID_Tabsurf     [&Tabulated Surface]^C^C_tabsurf
ID_Rulesurf    [&Ruled Surface]^C^C_rulesurf
ID_Edgesurf    [<-E&dge Surface]^C^C_edgesurf
ID_MnSolids  [->Sol&ids]
ID_Box         [&Box]^C^C_box
ID_Sphere      [&Sphere]^C^C_sphere
ID_Cylinder    [&Cylinder]^C^C_cylinder
ID_Cone        [C&one]^C^C_cone
ID_Wedge       [&Wedge]^C^C_wedge
ID_Torus       [&Torus]^C^C_torus
               [--]
ID_Extrude     [E&xtrude]^C^C_extrude
ID_Revolve     [&Revolve]^C^C_revolve
               [--]
ID_Slice       [S&lice]^C^C_slice
ID_Section     [S&ection]^C^C_section
ID_Interfere   [&Interference]^C^C_interfere
               [--]
ID_MnSetup     [->Set&up]
ID_Soldraw       [&Drawing]^C^C_soldraw
ID_Solview       [&View]^C^C_solview
ID_Solprof       [<-<-&Profile]^C^C_solprof

***POP8
**DIMENSION
ID_MnDimensi [Dime&nsion]
ID_QDim      [&QDIM]^C^C_qdim
             [--]
ID_Dimordina [&Ordinate]^C^C_dimordinate
             [--]
ID_Dimradius [&Radius]^C^C_dimradius
ID_Dimdiamet [&Diameter]^C^C_dimdiameter
ID_Dimangula [&Angular]^C^C_dimangular
             [--]
ID_Dimbaseli [&Baseline]^C^C_dimbaseline
ID_Dimcontin [&Continue]^C^C_dimcontinue
             [--]
ID_Leader    [L&eader]^C^C_qleader
ID_Tolerance [&Tolerance...]^C^C_tolerance
ID_Dimcenter [Center &Mark]^C^C_dimcenter
             [--]
ID_Dimedito   [Obli&que]^C^C_dimedit _o
ID_MnAlign   [->Align Te&xt]
ID_DimteditH   [&Home]^C^C_dimedit _h
ID_DimteditA   [&Angle]^C^C_dimtedit \_a
               [--]
ID_DimteditL   [&Left]^C^C_dimtedit \_l
ID_DimteditC   [&Center]^C^C_dimtedit \_c
ID_DimteditR   [<-&Right]^C^C_dimtedit \_r
             [--]
ID_Ddim      [&Style...]'_dimstyle
ID_Dimoverri [O&verride]^C^C_dimoverride
ID_DimstyleA [&Update]^C^C_-dimstyle _apply

***POP9
**MODIFY
ID_MnModify  [&Modify]
ID_Ai_propch [&Properties]^C^C_properties
ID_Matchprop [&Match Properties]'_matchprop
ID_MnObject  [->&Object]
ID_MnExterna   [->&External Reference]
ID_Xbind         [&Bind...]^C^C_xbind
                 [--]
ID_Xclipfram     [<-$(if,$(eq,$(getvar,xclipframe),1),!.)&Frame]$M=$(if,$(eq,$(getvar,xclipframe),1),^C^C_xclipframe 0,^C^C_xclipframe 1)
ID_MnImage     [->&Image]
ID_Imageadju     [&Adjust...]^C^C_imageadjust
ID_Imagequal     [&Quality]^C^C_imagequality
ID_Transpare     [&Transparency]^C^C_transparency
                 [--]
ID_Imagefram     [<-<-&Frame]^C^C_imageframe
ID_Clip      [->Clip]
ID_ImageClip   [&Image]^C^C_imageclip
ID_XrefClip    [&Xref]^C^C_xclip
ID_VportClip   [<-&Viewport]^C^C_vpclip
               [--]
ID_Hatchedit   [Hatch...]^C^C_hatchedit
ID_Pedit       [Polyline]^C^C_pedit
ID_Splinedit   [Spline]^C^C_splinedit
ID_Mledit      [Multiline...]^C^C_mledit
ID_MnAttribu   [->Attribute]
ID_AtteditSin        [&Single...]^C^C_attedit
ID_AtteditGlo       [<-&Global]^C^C_-attedit
ID_Ddedit      [Text...]^C^C_ddedit
ID_Refedit   [->In-place Xref and &Block Edit]
ID_RefEditor   [&Edit Reference]^C^C_refedit;
ID_RefAdd      [$(if,$(eq,$(getvar,refeditname),""),~,)&Add to Working set]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert);^P,+
$(if,$(and,$(=,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),^C^C_refset;,^C^C_refset _add;))^Z
ID_RefRemove   [$(if,$(eq,$(getvar,refeditname),""),~,)&Remove from Working set]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert);^P,+
$(if,$(and,$(=,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),^C^C_refset;,^C^C_refset _rem;))^Z
ID_RefSave     [$(if,$(eq,$(getvar,refeditname),""),~,)&Save Reference Edits]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert)^P,^C^C_refclose _sav)
ID_RefDscrd    [<-$(if,$(eq,$(getvar,refeditname),""),~,)&Discard Reference Edits]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert)^P,^C^C_refclose _disc)
             [--]
ID_Erase     [&Erase]^C^C_erase
ID_Copy      [Cop&y]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_copy,^C^C_copy)
ID_Mirror    [M&irror]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_mirror,^C^C_mirror)
ID_Offset    [Off&set]^C^C_offset
ID_Array     [&Array]^C^C_array
             [--]
ID_Move      [Mo&ve]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_move,^C^C_move)
ID_Rotate    [&Rotate]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_rotate,^C^C_rotate)
ID_Scale     [Sca&le]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_scale,^C^C_scale)
ID_Stretch   [Stretc&h]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_stretch,^C^C_stretch)
ID_Lengthen  [Len&gthen]^C^C_lengthen
             [--]
ID_Trim      [&Trim]^C^C_trim
ID_Extend    [Exten&d]^C^C_extend
ID_Break     [Brea&k]^C^C_break
ID_Chamfer   [&Chamfer]^C^C_chamfer
ID_Fillet    [&Fillet]^C^C_fillet
             [--]
ID_Mn3dopera [->&3D Operation]
ID_3darray     [&3D Array]^C^C_3darray
ID_Mirror3d    [&Mirror 3D]^C^C_mirror3d
ID_Rotate3d    [&Rotate 3D]^C^C_rotate3d
               [--]
ID_Align       [<-A&lign]^C^C_align
ID_SolidsEdi [->Solids Editi&ng]
ID_Union       [&Union]^C^C_union
ID_Subtract    [&Subtract]^C^C_subtract
ID_Intersect   [&Intersect]^C^C_intersect
             [--]
ID_FaceExtru   [&Extrude faces]^C^C_solidedit _face _extrude
ID_FaceMove    [&Move faces]^C^C_solidedit _face _move
ID_FaceOffse   [&Offset faces]^C^C_solidedit _face _offset
ID_FaceDel     [&Delete faces]^C^C_solidedit _face _delete
ID_FaceRotat   [Rot&ate faces]^C^C_solidedit _face _rotate
ID_FaceTaper   [&Taper faces]^C^C_solidedit _face _taper
ID_FaceColor   [&Color faces]^C^C_solidedit _face _color
ID_FaceCopy    [Copy &faces]^C^C_solidedit _face _copy
             [--]
ID_EdgeColor   [Co&lor edges]^C^C_solidedit _edge _color
ID_EdgeCopy    [Copy ed&ges]^C^C_solidedit _edge _copy
             [--]
ID_Imprint     [&Imprint]^C^C_solidedit _body _imprint
ID_BodyCln     [Clea&n]^C^C_solidedit _body _clean
ID_Separate    [&Separate]^C^C_solidedit _body _separate
ID_Shell       [S&hell]^C^C_solidedit _body _shell
ID_BodyChk     [<-Chec&k]^C^C_solidedit _body _check
             [--]
ID_Explode   [E&xplode]^C^C_explode

***POP10
**WINDOW
ID_MnWindow  [&Window]
ID_WINDOW_CASCADE    [&Cascade]
ID_WINDOW_TILE_HORZ  [Tile &Horizontally]
ID_WINDOW_TILE_VERT  [&Tile Vertically]
ID_WINDOW_ARRANGE    [&Arrange Icons]

***POP11
**HELP
ID_MnHelp    [&Help]
ID_Help      [AutoCAD &Help\tF1]'_help
ID_PlotHelp  [Fast Track to &Plotting]^C^C^P(help "acad_plt" "Fast_Track_to_Plotting_Your_First_Drawing") ^P
             [--]
ID_Wnew      [&What's New](help "acad_ug" "whatsnew") 
ID_L_acla    [&Learning Assistance]^C^C^P(if (findfile "alalink.exe") (progn (princ)(startapp "alalink.exe") (princ)) (la_support_assistance_alert)) ^P
ID_Support   [&Support Assistance]^C^C^P(if (findfile "asa_main.hlp") (progn (princ)(help (findfile "asa_main.hlp") "contents")(princ)) (ai_support_assistance_alert)) ^P
ID_AcadWeb   [->Auto&desk on the Web]
ID_ACHomePage  [AutoCAD &Home Page]^C^C_browser http://www.autodesk.com/products/autocad/index.htm
ID_PlugIn      [AutoCAD &Plug-in Store]^C^C_browser http://www.cadplugins.com
ID_TechPubs    [AutoCAD &Technical Publications]^C^C_browser http://www.autodesk.com/techpubs/autocad
               [--]
ID_ADHomePage  [Autodesk H&ome Page]^C^C_browser http://www.autodesk.com
ID_ProdSupp    [Autodesk Product &Support Services]^C^C_browser http://www.autodesk.com/support
ID_DevRes      [Autodesk Developer's &Resource Guide]^C^C_browser http://www.argonline.com
ID_AUGI        [<-Autodesk &User Group International]^C^C^P(command "_browser" (findfile "augi.htm")) ^P
             [--]
ID_About     [&About AutoCAD]'_about

// POP menus with a primary alias of POP500 and above do not appear in the customize
// menu list of menus that can be inserted into the main menu bar. All context
// menus should have primary aliases of POP500 and above.

***POP500
**GRIPS
//  When a grip is hot, then display the following shortcut menu for grips.  See also AUX1 menu.
             [&Grips Cursor Menu]
ID_Enter     [&Enter];
             [--]
ID_GripMove  [&Move]_move
ID_GripMirro [M&irror]_mirror
ID_GripRotat [&Rotate]_rotate
ID_GripScale [Sca&le]_scale
ID_GripStret [&Stretch]_stretch
             [--]
ID_GripBase  [&Base Point]_base
ID_GripCopy  [&Copy]_copy
ID_GripRefer [$(if,$(or,$(eq,$(getvar,cmdnames),GRIP_SCALE),$(eq,$(getvar,cmdnames),GRIP_ROTATE)),,~)Re&ference]_reference
ID_GripUndo  [&Undo]_u
             [--]
ID_Modify  [&Properties]^C^C_properties
ID_GotoURL   [&Go to URL...]^C^C_gotourl
             [--]
ID_GripExit  [E&xit]_exit

***POP501
**CMDEFAULT
             [Context menu for default mode]
ID_CMNonLast [&Repeat %s]^C^C;
             [--]
ID_Ddedit      [Edit Te&xt]^C^C_ddedit
             [--]
ID_Copy      [&Copy]*^C^C_copy
ID_Move      [Mo&ve]*^C^C_move
ID_Offset    [Offset]*^C^C_offset
ID_Stretch   [&Stretch]*^C^C_stretch
ID_Scale     [Scale]*^C^C_scale
ID_Extend    [&Extend]*^C^C_extend
ID_Rotate    [&Rotate]*^C^C_rotate
ID_Mirror    [&Mirror]*^C^C_mirror
ID_Fillet    [F&illet]*^C^C_fillet
ID_Array     [&Array]*^C^C_array
             [--]
ID_Line      [&Line]*^C^C_line
ID_Rectangle [Rectan&gle]*^C^C_rectangle
ID_CircleDia [Circle (&Diam)]^C^C_circle \_d
             [--]
ID_Trim      [&Trim]*^C^C_trim
ID_Break     [&Break]*^C^C_break
ID_Explode   [Ex&plode]*^C^C_explode
ID_Erase     [&Erase]*^C^C_erase
ID_U         [&Undo]^C^C_u^mU^mU
ID_Redo      [Re&do]^C^C_redo
             [--]
ID_Dist      [Distance]'_dist
ID_Dimlinear [Linear]^C^C_dimlinear
ID_Dimaligne [Ali&gned]^C^C_dimaligned
             [--]
ID_TextFind  [&Find/Replace...]^C^C_find
ID_Ai_propch [&Properties]^C^C_properties
ID_Preferenc [&Options...]^C^C_options

***POP502
**CMEDIT
             [Context menu for edit mode]
ID_CMNonLast [&Repeat %s]^C^C;
             [--]
ID_Ddedit      [Edit Te&xt]^C^C_ddedit
             [--]
ID_Copy      [&Copy]*^C^C_copy
ID_Move      [Mo&ve]*^C^C_move
ID_Offset    [Offset]*^C^C_offset
ID_Stretch   [&Stretch]*^C^C_stretch
ID_Scale     [Scale]*^C^C_scale
ID_Extend    [&Extend]*^C^C_extend
ID_Rotate    [&Rotate]*^C^C_rotate
ID_Mirror    [&Mirror]*^C^C_mirror
ID_Fillet    [F&illet]*^C^C_fillet
ID_Array     [&Array]*^C^C_array
             [--]
ID_Line      [&Line]*^C^C_line
ID_Rectangle [Rectan&gle]*^C^C_rectangle
ID_CircleDia [Circle (&Diam)]^C^C_circle \_d
             [--]
ID_Trim      [&Trim]*^C^C_trim
ID_Break     [&Break]*^C^C_break
ID_Explode   [Ex&plode]*^C^C_explode
ID_Erase     [&Erase]*^C^C_erase
ID_U         [&Undo]^C^C_u^mU^mU
ID_Redo      [Re&do]^C^C_redo
             [--]
ID_Dist      [Distance]'_dist
ID_Dimlinear [Linear]^C^C_dimlinear
ID_Dimaligne [Ali&gned]^C^C_dimaligned
             [--]
ID_TextFind  [&Find/Replace...]^C^C_find
ID_Ai_propch [&Properties]^C^C_properties
ID_Preferenc [&Options...]^C^C_options
***POP503
**CMCOMMAND
             [Context menu for command mode]
ID_Enter     [&Enter];
ID_Cancel    [Cancel]^C
             [--]
ID_Pan	     [$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),ZOOM),~,)&Pan]'_pan
ID_ZoomRealt [$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),ZOOM),~,)&Zoom]'_zoom ;

***POP504
**OBJECTS_DIMENSION
                [Context Menu for Dimension Objects]
ID_DimText      [->Dim Te&xt position]
ID_DimAbove     [&Above dim line]^C^C_ai_dim_textabove
ID_DimTxtCen    [&Centered]^C^C_ai_dim_textcenter
ID_DimHome      [&Home text]^C^C_ai_dim_texthome
ID_DimTxtMove2  [&Move text alone]^C^C_aidimtextmove _2
ID_DimTxtMove1  [Move with &leader]^C^C_aidimtextmove _1
ID_DimTxtMove0  [<-Move with &dim line]^C^C_aidimtextmove _0
ID_DimPrec      [->P&recision]
ID_DimPrec0      [0]^C^C_aidimprec _0
ID_DimPrec1      [0.0]^C^C_aidimprec _1
ID_DimPrec2      [0.00]^C^C_aidimprec _2
ID_DimPrec3      [0.000]^C^C_aidimprec _3
ID_DimPrec4      [0.0000]^C^C_aidimprec _4
ID_DimPrec5      [0.00000]^C^C_aidimprec _5
ID_DimPrec6      [<-0.000000]^C^C_aidimprec _6
ID_DimSty1     [->&Dim Style]
ID_DimSty2        [&Save as New Style...]^C^C_aidimstyle _S
                  [--]
ID_DimSty3        [Dim Style MRU1]^C^C_aidimstyle _1
ID_DimSty4        [Dim Style MRU2]^C^C_aidimstyle _2
ID_DimSty5        [Dim Style MRU3]^C^C_aidimstyle _3
ID_DimSty6        [Dim Style MRU4]^C^C_aidimstyle _4
ID_DimSty7        [Dim Style MRU5]^C^C_aidimstyle _5
ID_DimSty8        [Dim Style MRU6]^C^C_aidimstyle _6
ID_DimSty9        [<-&Other...]^C^C_aidimstyle _O

***POP505
**OBJECT_VIEWPORT
                 [Context menu for Viewport Object]
ID_VpClip        [&Viewport Clip]^C^C_vpclip
ID_Vport_disp    [->&Display Viewport Objects]
ID_Vport_dispon  [&Yes]^C^C_-vports _on _p;;
ID_Vport_dispoff [<-&No]^C^C_-vports _off _p;;
ID_Vport_lock    [->Display &Locked]
ID_Vport_lockon  [&Yes]^C^C_-vports _lock _on _p;;
ID_Vport_lockoff [<-&No]^C^C_-vports _lock _off _p;;
ID_Vport_hide    [->&Hide Plot]
ID_Vport_hideon  [&Yes]^C^C_-vports _hide _on _p;;
ID_Vport_hideoff [<-&No]^C^C_-vports _hide _off _p;;

***POP506
**OBJECTS_XREF
                [Context menu for XREF Objects]
ID_Xclip        [Xref Cl&ip]^C^C_xclip
ID_XRef         [Xref Ma&nager...]^C^C_xref

***POP507
**OBJECT_MTEXT
				[Context menu for MTEXT Object]
ID_Mtedit		[Mtext Ed&it...]^C^C_mtedit

***POP508
**OBJECT_TEXT
				[Context menu for TEXT object]
ID_Ddedit		[Text Ed&it...]^C^C_ddedit

***POP509
**OBJECT_HATCH
				[Context menu for HATCH object]
ID_Hatchedit	[&Hatch Edit...]^C^C_hatchedit

***POP510
**OBJECT_LWPOLYLINE
				[Context menu for PLINE object]
ID_Pedit		[Polyline Ed&it]^C^C_pedit

***POP511
**OBJECT_SPLINE
				[Context menu for SPLINE object]
ID_Splinedit	[Spline Ed&it]^C^C_splinedit

//
//   Begin AutoCAD ToolBars
//

***TOOLBARS

**TB_DIMENSION
ID_TbDimensi [_Toolbar("Dimension", _Floating, _Hide, 100, 130, 1)]
ID_Dimlinear [_Button("Linear Dimension", ICON_16_DIMLIN, ICON_16_DIMLIN)]^C^C_dimlinear
ID_Dimaligne [_Button("Aligned Dimension", ICON_16_DIMALI, ICON_16_DIMALI)]^C^C_dimaligned
ID_Dimordina [_Button("Ordinate Dimension", ICON_16_DIMORD, ICON_16_DIMORD)]^C^C_dimordinate
             [--]
ID_Dimradius [_Button("Radius Dimension", ICON_16_DIMRAD, ICON_16_DIMRAD)]^C^C_dimradius
ID_Dimdiamet [_Button("Diameter Dimension", ICON_16_DIMDIA, ICON_16_DIMDIA)]^C^C_dimdiameter
ID_Dimangula [_Button("Angular Dimension", ICON_16_DIMANG, ICON_16_DIMANG)]^C^C_dimangular
             [--]
ID_QDim      [_Button("Quick Dimension", ICON_16_QDIM, ICON_16_QDIM)]^C^C_qdim                          
ID_Dimbaseli [_Button("Baseline Dimension", ICON_16_DIMBAS, ICON_16_DIMBAS)]^C^C_dimbaseline
ID_Dimcontin [_Button("Continue Dimension", ICON_16_DIMCON, ICON_16_DIMCON)]^C^C_dimcontinue
             [--]
ID_Leader    [_Button("Quick Leader", ICON_16_QLEADER, ICON_16_QLEADER)]^C^C_qleader                          
ID_Tolerance [_Button("Tolerance", ICON_16_TOLERA, ICON_16_TOLERA)]^C^C_tolerance
ID_Dimcenter [_Button("Center Mark", ICON_16_DIMCEN, ICON_16_DIMCEN)]^C^C_dimcenter
             [--]
ID_Dimedit   [_Button("Dimension Edit", ICON_16_DIMNEW, ICON_16_DIMNEW)]^C^C_dimedit
ID_Dimtedit  [_Button("Dimension Text Edit", ICON_16_DIMHOM, ICON_16_DIMHOM)]^C^C_dimtedit
ID_DimUpdate [_Button("Dimension Update", ICON_16_DIMUPD, ICON_16_DIMUPD)]^C^C_-dimstyle _apply
             [--]
ID_DimStyle  [_Control(_dimstyle)]
ID_Ddim      [_Button("Dimension Style", ICON_16_DIMSTY, ICON_16_DIMSTY)]'_dimstyle

**TB_DRAW
ID_TbDraw    [_Toolbar("Draw", _Left, _Show, 0, 0, 1)]
ID_Line      [_Button("Line", ICON_16_LINE, ICON_16_LINE)]^C^C_line
ID_Xline     [_Button("Construction Line", ICON_16_XLINE, ICON_16_XLINE)]^C^C_xline
ID_Mline     [_Button("Multiline", ICON_16_MLINE, ICON_16_MLINE)]^C^C_mline
ID_Pline     [_Button("Polyline", ICON_16_PLINE, ICON_16_PLINE)]^C^C_pline
ID_Polygon   [_Button("Polygon", ICON_16_POLYGO, ICON_16_POLYGO)]^C^C_polygon
ID_Rectang   [_Button("Rectangle", ICON_16_RECTAN, ICON_16_RECTAN)]^C^C_rectang
ID_Arc       [_Button("Arc", ICON_16_ARC3PT, ICON_16_ARC3PT)]^C^C_arc
ID_Circle    [_Button("Circle", ICON_16_CIRRAD, ICON_16_CIRRAD)]^C^C_circle
ID_Spline    [_Button("Spline", ICON_16_SPLINE, ICON_16_SPLINE)]^C^C_spline
ID_Ellipse   [_Button("Ellipse", ICON_16_ELLAE, ICON_16_ELLAE)]^C^C_ellipse
ID_TbInsert  [_Flyout("Block", ICON_16_BLOCK, ICON_16_BLOCK, _OtherIcon, ACAD.TB_INSERT)]
ID_Bmake     [_Button("Make Block", ICON_16_BLOCK, ICON_16_BLOCK)]^C^C_block
ID_Point     [_Button("Point", ICON_16_POINT, ICON_16_POINT)]*^C^C_point
ID_Bhatch    [_Button("Hatch", ICON_16_BHATCH, ICON_16_BHATCH)]^C^C_bhatch
ID_Region    [_Button("Region", ICON_16_REGION, ICON_16_REGION)]^C^C_region
ID_Mtext     [_Button("Multiline Text", ICON_16_MTEXT, ICON_16_MTEXT)]^C^C_mtext

**TB_INQUIRY
ID_TbInquiry [_Toolbar("Inquiry", _Floating, _Hide, 100, 170, 1)]
ID_Dist      [_Button("Distance", ICON_16_DIST, ICON_16_DIST)]'_dist
ID_Area      [_Button("Area", ICON_16_AREA, ICON_16_AREA)]^C^C_area
ID_Massprop  [_Button("Mass Properties", ICON_16_MASSPR, ICON_16_MASSPR)]^C^C_massprop
             [--]
ID_List      [_Button("List", ICON_16_LIST, ICON_16_LIST)]^C^C_list
ID_Id        [_Button("Locate Point", ICON_16_ID, ICON_16_ID)]'_id

**TB_INSERT
ID_TbInsert  [_Toolbar("Insert", _Floating, _Hide, 100, 190, 1)]
ID_Ddinsert  [_Button("Insert Block", ICON_16_DINSER, ICON_16_DINSER)]^C^C_insert
             [--]
ID_Xref      [_Button("External Reference", ICON_16_XREATT, ICON_16_XREATT)]^C^C_xref
ID_Image     [_Button("Image", ICON_16_IMAGE, ICON_16_IMAGE)]^C^C_image
             [--]
ID_Import    [_Button("Import", ICON_16_IMPORT, ICON_16_IMPORT)]^C^C_import
             [--]
ID_Insertobj [_Button("OLE Object", ICON_16_INSOLE, ICON_16_INSOLE)]^C^C_insertobj

**TB_LAYOUTS
ID_TbLayouts [_Toolbar("Layouts", _Floating, _Hide, 100, 350, 1)]
ID_LayNew    [_Button("New Layout", ICON_16_LAYNEW, ICON_16_LAYNEW)]^C^C_-layout _n
ID_LayTemp	 [_Button("Layout from Template", ICON_16_LAYTEM, ICON_16_LAYTEM)]^C^C_-layout _t
ID_PlotSetup [_Button("Page Setup", ICON_16_PLTSET, ICON_16_PLTSET)]^C^C_pagesetup
ID_VpDialog  [_Button("Display Viewports Dialog", ICON_16_VPDLG, ICON_16_VPDLG)]^C^C_vports

**TB_MODIFY
ID_TbModify  [_Toolbar("Modify", _Left, _Show, 1, 0, 1)]
ID_Erase     [_Button("Erase", ICON_16_ERASE, ICON_16_ERASE)]^C^C_erase
ID_Copy      [_Button("Copy Object", ICON_16_COPYOB, ICON_16_COPYOB)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_copy,^C^C_copy)
ID_Mirror    [_Button("Mirror", ICON_16_MIRROR, ICON_16_MIRROR)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_mirror,^C^C_mirror)
ID_Offset    [_Button("Offset", ICON_16_OFFSET, ICON_16_OFFSET)]^C^C_offset
ID_Array     [_Button("Array", ICON_16_ARRREC, ICON_16_ARRREC)]^C^C_array
ID_Move      [_Button("Move", ICON_16_MOVE, ICON_16_MOVE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_move,^C^C_move)
ID_Rotate    [_Button("Rotate", ICON_16_ROTATE, ICON_16_ROTATE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_rotate,^C^C_rotate)
ID_Scale     [_Button("Scale", ICON_16_SCALE, ICON_16_SCALE)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),grip),_scale,^C^C_scale)
ID_Stretch   [_Button("Stretch", ICON_16_STRETC, ICON_16_STRETC)]$M=$(if,$(eq,+
$(substr,$(getvar,cmdnames),1,4),GRIP),_stretch,^C^C_stretch)
ID_Lengthen  [_Button("Lengthen", ICON_16_LENGTH, ICON_16_LENGTH)]^C^C_lengthen
ID_Trim      [_Button("Trim", ICON_16_TRIM, ICON_16_TRIM)]^C^C_trim
ID_Extend    [_Button("Extend", ICON_16_EXTEND, ICON_16_EXTEND)]^C^C_extend
ID_Break     [_Button("Break", ICON_16_BRE2PT, ICON_16_BRE2PT)]^C^C_break
ID_Chamfer   [_Button("Chamfer", ICON_16_CHAMFE, ICON_16_CHAMFE)]^C^C_chamfer
ID_Fillet    [_Button("Fillet", ICON_16_FILLET, ICON_16_FILLET)]^C^C_fillet
ID_Explode   [_Button("Explode", ICON_16_EXPLOD, ICON_16_EXPLOD)]^C^C_explode

**TB_MODIFY_II
ID_TbModifII [_Toolbar("Modify II", _Floating, _Hide, 100, 270, 1)]
ID_Draworder [_Button("Draworder",ICON_16_DRWORD,ICON_16_DRWORD)]^C^C_draworder
             [--]
ID_Hatchedit [_Button("Edit Hatch", ICON_16_HATEDI, ICON_16_HATEDI)]^C^C_hatchedit
ID_Pedit     [_Button("Edit Polyline", ICON_16_PEDIT, ICON_16_PEDIT)]^C^C_pedit
ID_Splinedit [_Button("Edit Spline", ICON_16_SPLEDI, ICON_16_SPLEDI)]^C^C_splinedit
ID_Mledit    [_Button("Edit Multiline", ICON_16_MLEDIT, ICON_16_MLEDIT)]^C^C_mledit
ID_AtteditSin    [_Button("Edit Attribute", ICON_16_ATTEDI, ICON_16_ATTEDI)]^C^C_attedit
ID_Ddedit    [_Button("Edit Text", ICON_16_TEXEDI, ICON_16_TEXEDI)]^C^C_ddedit

**TB_OBJECT_PROPERTIES
ID_TbObjectP [_Toolbar("Object Properties", _Top, _Show, 0, 1, 1)]
ID_Ai_molc   [_Button("Make Object's Layer Current", ICON_16_MOLC, ICON_16_MOLC)]^C^C_ai_molc
ID_Layer     [_Button("Layers", ICON_16_LAYERS, ICON_16_LAYERS)]'_layer
             [--]
ID_CtrlLayer [_Control(_Layer)]
             [--]
ID_CtrlColor [_Control(_Color)]
             [--]
ID_CtrlLinet [_Control(_Linetype)]
             [--]
ID_CtrlLineW [_Control(_Lineweight)]
             [--]
ID_CtrlPStyl [_Control(_PlotStyle)]

**TB_OBJECT_SNAP
ID_TbOsnap   [_Toolbar("Object Snap", _Floating, _Hide, 100, 210, 1)]
ID_Tracking  [_Button("Temporary Tracking Point", ICON_16_OSNTMP, ICON_16_OSNTMP)]_tt
ID_From      [_Button("Snap From", ICON_16_OSNFRO, ICON_16_OSNFRO)]_from
             [--]
ID_OsnapEndp [_Button("Snap to Endpoint", ICON_16_OSNEND, ICON_16_OSNEND)]_endp
ID_OsnapMidp [_Button("Snap to Midpoint", ICON_16_OSNMID, ICON_16_OSNMID)]_mid
ID_OsnapInte [_Button("Snap to Intersection", ICON_16_OSNINT, ICON_16_OSNINT)]_int
ID_OsnapAppa [_Button("Snap to Apparent Intersect", ICON_16_OSNAPP, ICON_16_OSNAPP)]_appint
ID_OsnapExte [_Button("Snap to Extension", ICON_16_OSNEXT, ICON_16_OSNEXT)]_ext
             [--]
ID_OsnapCent [_Button("Snap to Center", ICON_16_OSNCEN, ICON_16_OSNCEN)]_cen
ID_OsnapQuad [_Button("Snap to Quadrant", ICON_16_OSNQUA, ICON_16_OSNQUA)]_qua
ID_OsnapTang [_Button("Snap to Tangent", ICON_16_OSNTAN, ICON_16_OSNTAN)]_tan
             [--]
ID_OsnapPerp [_Button("Snap to Perpendicular", ICON_16_OSNPER, ICON_16_OSNPER)]_per
ID_OsnapPara [_Button("Snap to Parallel", ICON_16_OSNPAR, ICON_16_OSNPAR)]_par
ID_OsnapInse [_Button("Snap to Insert", ICON_16_OSNINS, ICON_16_OSNINS)]_ins
ID_OsnapNode [_Button("Snap to Node", ICON_16_OSNNOD, ICON_16_OSNNOD)]_nod
             [--]
ID_OsnapNear [_Button("Snap to Nearest", ICON_16_OSNNEA, ICON_16_OSNNEA)]_nea
ID_OsnapNone [_Button("Snap to None", ICON_16_OSNNON, ICON_16_OSNNON)]_non
             [--]
ID_Osnap     [_Button("Object Snap Settings", ICON_16_OSNAP, ICON_16_OSNAP)]'_+dsettings 2

**TB_ORBIT
ID_TbOrbit   [_Toolbar("3D Orbit", _Floating, _Hide, 100, 350, 1)]
ID_3dpan     [_Button("3D Pan", ICON_16_3DPAN, ICON_16_3DPAN)]^C^C_3dpan
ID_3dzoom    [_Button("3D Zoom", ICON_16_3DZOOM, ICON_16_3DZOOM)]^C^C_3dzoom
ID_3dorbit   [_Button("3D Orbit", ICON_16_3DORBIT, ICON_16_3DORBIT)]^C^C_3dorbit
ID_3dcorbit  [_Button("3D Continuous Orbit", ICON_16_3DCORBIT, ICON_16_3DCORBIT)]^C^C_3dcorbit
ID_3dswivel  [_Button("3D Swivel", ICON_16_3DSWIVEL, ICON_16_3DSWIVEL)]^C^C_3dswivel
ID_3ddistanc [_Button("3D Adjust Distance", ICON_16_3DDISTANCE, ICON_16_3DDISTANCE)]^C^C_3ddistance
ID_3dclip    [_Button("3D Adjust Clip Planes", ICON_16_3DCLIP, ICON_16_3DCLIP)]^C^C_3dclip
ID_3dclipfr  [_Button("Front Clip On/Off", ICON_16_3DCLIPFR, ICON_16_3DCLIPFR)]^C^C_dview _all  _cl$M=$(if,$(and,$(getvar,viewmode),2),$(if,$(and,$(getvar,viewmode),4), _off _cl _b _on^M^M, _off^M^M), _f $(getvar,frontz)^M^M)^Z
ID_3dclipbk  [_Button("Back Clip On/Off", ICON_16_3DCLIPBK, ICON_16_3DCLIPBK)]^C^C_dview _all  _cl _b$M=$(if,$(and,$(getvar,viewmode),4), _off^M^M, _on^M^M)^Z
             [--]
ID_3dviews   [_Control(_View)]

**TB_SHADING
ID_TbShading [_Toolbar("Shade", _Floating, _Hide, 100, 390, 1)]			
ID_2doptim   [_Button("2D Wireframe", ICON_16_2DOPTIM, ICON_16_2DOPTIM)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _2)
ID_Wireframe [_Button("3D Wireframe", ICON_16_WIREFRAME, ICON_16_WIREFRAME)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _3)
ID_Hidden    [_Button("Hidden", ICON_16_HIDDEN, ICON_16_HIDDEN)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _h)
ID_Flat      [_Button("Flat Shaded", ICON_16_FLAT, ICON_16_FLAT)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _f)
ID_Gouraud   [_Button("Gouraud Shaded", ICON_16_GOURAUD, ICON_16_GOURAUD)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _g)
ID_FlatEdges [_Button("Flat Shaded, Edges On", ICON_16_FLATEDGES, ICON_16_FLATEDGES)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _l)
ID_GourEdges [_Button("Gouraud Shaded, Edges On", ICON_16_GOUREDGES, ICON_16_GOUREDGES)]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _o)

**TB_REFEDIT
ID_TbRefedit [_Toolbar("Refedit", _Floating, _Hide, 100, 170, 1)]
ID_RefEditor [_Button("Edit block or Xref", ICON_16_REFED_EDIT, ICON_16_REFED_EDIT)]^C^C_refedit;
             [--]
             [_Control(_Refblkname)]
             [--]
ID_RefAdd    [_Button("Add objects to working set", ICON_16_REFED_ADD, ICON_16_REFED_ADD)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert);^P,+
$(if,$(and,$(=,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),^C^C_refset;,^C^C_refset _add;))^Z
ID_RefRemove [_Button("Remove objects from working set", ICON_16_REFED_RMV, ICON_16_REFED_RMV)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert);^P,+
$(if,$(and,$(=,$(getvar,tilemode),0),$(=,$(getvar,cvport),1)),^C^C_refset;,^C^C_refset _rem;))^Z
ID_RefDscrd  [_Button("Discard changes to reference", ICON_16_REFED_DISC, ICON_16_REFED_DISC)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert)^P,^C^C_refclose _disc)
ID_RefSave   [_Button("Save back changes to reference", ICON_16_REFED_SAVE, ICON_16_REFED_SAVE)]$M=$(if,$(eq,$(getvar,refeditname),""),^C^C^P(ai_refedit_alert)^P,^C^C_refclose _sav)

**TB_REFERENCE
ID_TbReferen [_Toolbar("Reference", _Floating, _Hide, 100, 370, 1)]
ID_Xref      [_Button("External Reference", ICON_16_XREATT, ICON_16_XREATT)]^C^C_xref
ID_Xattach   [_Button("External Reference Attach", ICON_16_XATTAC, ICON_16_XATTAC)]^C^C_xattach
ID_Xclip     [_Button("External Reference Clip",ICON_16_XRECLI,ICON_16_XRECLI)]^C^C_xclip
ID_Xbind     [_Button("External Reference Bind",ICON_16_XBIND,ICON_16_XBIND)]^C^C_xbind
ID_Xclipfram [_Button("External Reference Clip Frame",ICON_16_XCLIPFRAME,ICON_16_XCLIPFRAME)]$M=$(if,$(eq,$(getvar,xclipframe),1),^C^C_xclipframe _0,^C^C_xclipframe _1)
             [--]
ID_Image     [_Button("Image", ICON_16_IMAGE, ICON_16_IMAGE)]^C^C_image
ID_ImageAtta [_Button("Image Attach", ICON_16_IMGATT, ICON_16_IMGATT)]^C^C_imageattach
ID_Imageclip [_Button("Image Clip",ICON_16_IMGCLP, ICON_16_IMGCLP)]^C^C_imageclip
ID_Imageadju [_Button("Image Adjust",ICON_16_IMGADJ, ICON_16_IMGADJ)]^C^C_imageadjust
ID_Imagequal [_Button("Image Quality",ICON_16_IMGQUA, ICON_16_IMGQUA)]^C^C_imagequality
ID_Transpare [_Button("Image Transparency",ICON_16_TRANSP, ICON_16_TRANSP)]^C^C_transparency
ID_Imagefram [_Button("Image Frame",ICON_16_IMGFRAME, ICON_16_IMGFRAME)]^C^C_imageframe

**TB_RENDER
ID_TbRender  [_Toolbar("Render", _Floating, _Hide, 100, 230, 1)]
ID_Hide      [_Button("Hide", ICON_16_HIDE, ICON_16_HIDE)]^C^C_hide
             [--]
ID_Render    [_Button("Render", ICON_16_RENDER, ICON_16_RENDER)]^C^C_render
             [--]
ID_Scene     [_Button("Scenes", ICON_16_SCENE, ICON_16_SCENE)]^C^C_scene
ID_Light     [_Button("Lights", ICON_16_LIGHT, ICON_16_LIGHT)]^C^C_light
ID_Rmat      [_Button("Materials", ICON_16_RMAT, ICON_16_RMAT)]^C^C_rmat
ID_Matlib    [_Button("Materials Library", ICON_16_MATLIB, ICON_16_MATLIB)]^C^C_matlib
ID_Setuv     [_Button("Mapping", ICON_16_SETUV, ICON_16_SETUV)]^C^C_setuv
             [--]
ID_Backgroun [_Button("Background", ICON_16_BACKGR, ICON_16_BACKGR)]^C^C_background
ID_Fog       [_Button("Fog", ICON_16_FOG, ICON_16_FOG)]^C^C_fog
ID_Lsnew     [_Button("Landscape New", ICON_16_LSNEW, ICON_16_LSNEW)]^C^C_lsnew
ID_Lsedit    [_Button("Landscape Edit", ICON_16_LSEDIT, ICON_16_LSEDIT)]^C^C_lsedit
ID_Lslib     [_Button("Landscape Library", ICON_16_LSLIB, ICON_16_LSLIB)]^C^C_lslib
             [--]
ID_Rpref     [_Button("Render Preferences", ICON_16_RPREF, ICON_16_RPREF)]^C^C_rpref
ID_Stats     [_Button("Statistics", ICON_16_STATS, ICON_16_STATS)]^C^C_stats

**TB_SOLIDS
ID_TbSolids  [_Toolbar("Solids", _Floating, _Hide, 100, 250, 1)]
ID_Box       [_Button("Box", ICON_16_BOX, ICON_16_BOX)]^C^C_box
ID_Sphere    [_Button("Sphere", ICON_16_SPHERE, ICON_16_SPHERE)]^C^C_sphere
ID_Cylinder  [_Button("Cylinder", ICON_16_CYLIND, ICON_16_CYLIND)]^C^C_cylinder
ID_Cone      [_Button("Cone", ICON_16_CONE, ICON_16_CONE)]^C^C_cone
ID_Wedge     [_Button("Wedge", ICON_16_WEDGE, ICON_16_WEDGE)]^C^C_wedge
ID_Torus     [_Button("Torus", ICON_16_TORUS, ICON_16_TORUS)]^C^C_torus
             [--]
ID_Extrude   [_Button("Extrude", ICON_16_EXTRUD, ICON_16_EXTRUD)]^C^C_extrude
ID_Revolve   [_Button("Revolve", ICON_16_REVOLV, ICON_16_REVOLV)]^C^C_revolve
             [--]
ID_Slice     [_Button("Slice", ICON_16_SLICE, ICON_16_SLICE)]^C^C_slice
ID_Section   [_Button("Section", ICON_16_SECTIO, ICON_16_SECTIO)]^C^C_section
ID_Interfere [_Button("Interfere", ICON_16_INTERF, ICON_16_INTERF)]^C^C_interfere
             [--]
ID_Soldraw   [_Button("Setup Drawing",ICON_16_SOLDR, ICON_16_SOLDR)]^C^C_soldraw
ID_Solview   [_Button("Setup View",ICON_16_SOLVW, ICON_16_SOLVW)]^C^C_solview
ID_Solprof   [_Button("Setup Profile",ICON_16_SOLPR, ICON_16_SOLPR)]^C^C_solprof

**TB_SOLIDS2
ID_TbSolids2 [_Toolbar("Solids Editing", _Floating, _Hide, 100, 250, 1)]
ID_Union     [_Button("Union", ICON_16_UNION, ICON_16_UNION)]^C^C_union
ID_Subtract  [_Button("Subtract", ICON_16_SUBTRA, ICON_16_SUBTRA)]^C^C_subtract
ID_Intersect [_Button("Intersect", ICON_16_INTERS, ICON_16_INTERS)]^C^C_intersect
             [--]
ID_FaceExtru [_Button("Extrude Faces", ICON_16_EXTRUD, ICON_16_EXTRUD)]^C^C_solidedit _face _extrude
ID_FaceMove  [_Button("Move Faces", ICON_16_MOVEFACE, ICON_16_MOVEFACE)]^C^C_solidedit _face _move
ID_FaceOffse [_Button("Offset Faces", ICON_16_OFFSETFACE, ICON_16_OFFSETFACE)]^C^C_solidedit _face _offset
ID_FaceDel   [_Button("Delete Faces", ICON_16_DELFACE, ICON_16_DELFACE)]^C^C_solidedit _face _delete
ID_FaceRotat [_Button("Rotate Faces", ICON_16_ROTATEFACE, ICON_16_ROTATEFACE)]^C^C_solidedit _face _rotate
ID_FaceTaper [_Button("Taper Faces", ICON_16_TAPER, ICON_16_TAPER)]^C^C_solidedit _face _taper
ID_FaceCopy  [_Button("Copy Faces", ICON_16_COPYFACE, ICON_16_COPYFACE)]^C^C_solidedit _face _copy
ID_FaceColor [_Button("Color Faces", ICON_16_COLORFACE, ICON_16_COLORFACE)]^C^C_solidedit _face _color
             [--]
ID_EdgeCopy  [_Button("Copy Edges", ICON_16_COPYEDGE, ICON_16_COPYEDGE)]^C^C_solidedit _edge _copy
ID_EdgeColor [_Button("Color Edges", ICON_16_COLOREDGE, ICON_16_COLOREDGE)]^C^C_solidedit _edge _color
             [--]
ID_Imprint   [_Button("Imprint", ICON_16_IMPRINT, ICON_16_IMPRINT)]^C^C_solidedit _body _imprint
ID_BodyCln   [_Button("Clean", ICON_16_CLEAN, ICON_16_CLEAN)]^C^C_solidedit _body _clean
ID_Separate  [_Button("Separate", ICON_16_SEPARATE, ICON_16_SEPARATE)]^C^C_solidedit _body _separate
ID_Shell     [_Button("Shell", ICON_16_SHELL, ICON_16_SHELL)]^C^C_solidedit _body _shell
ID_BodyChk   [_Button("Check", ICON_16_CHECK, ICON_16_CHECK)]^C^C_solidedit _body _check

**TB_STANDARD
ID_TbStandar [_Toolbar("Standard Toolbar", _Top, _Show, 0, 0, 1)]
ID_New       [_Button("New", ICON_16_NEW, ICON_16_NEW)]^C^C_new
ID_Open      [_Button("Open", ICON_16_OPEN, ICON_16_OPEN)]^C^C_open
ID_Save      [_Button("Save", ICON_16_SAVE, ICON_16_SAVE)]^C^C_qsave
             [--]
ID_Print     [_Button("Plot", ICON_16_PRINT, ICON_16_PRINT)]^C^C_plot
ID_Preview   [_Button("Print Preview", ICON_16_PREVIEW, ICON_16_PREVIEW)]^C^C_preview
ID_TextFind  [_Button("Find and Replace", ICON_16_TEXTFIND, ICON_16_TEXTFIND)]^C^C_find
             [--]
ID_Cutclip   [_Button("Cut to Clipboard", ICON_16_CUT, ICON_16_CUT)]^C^C_cutclip
ID_Copyclip  [_Button("Copy to Clipboard", ICON_16_COPY, ICON_16_COPY)]^C^C_copyclip
ID_Pasteclip [_Button("Paste from Clipboard", ICON_16_PASTE, ICON_16_PASTE)]^C^C_pasteclip
ID_Matchprop [_Button("Match Properties", ICON_16_MATCH, ICON_16_MATCH)]'_matchprop
             [--]
ID_U         [_Button("Undo", ICON_16_UNDO, ICON_16_UNDO)]^C^C_u
ID_Redo      [_Button("Redo", ICON_16_REDO, ICON_16_REDO)]^C^C_redo
             [--]
ID_Hyperlink [_Button("Insert Hyperlink", ICON_16_URL, ICON_16_URL)]^C^C_hyperlink
             [--]
ID_TbOsnap   [_Flyout("Object Snap", ICON_16_OSNAP, ICON_16_OSNAP, _OtherIcon, ACAD.TB_OBJECT_SNAP)]
ID_TbUcs     [_Flyout("UCS", ICON_16_UCS, ICON_16_UCS, _OtherIcon, ACAD.TB_UCS)]
ID_TbInquiry [_Flyout("Inquiry", ICON_16_LIST, ICON_16_LIST, _OtherIcon, ACAD.TB_INQUIRY)]
             [--]
ID_Redrawall [_Button("Redraw All", ICON_16_REDALL, ICON_16_REDALL)]'_redrawall
             [--]
ID_VpDialog  [_Button("Display Viewports Dialog", ICON_16_VPDLG, ICON_16_VPDLG)]^C^C_vports
ID_TbViewpoi [_Flyout("Viewpoint", ICON_16_DDVIEW, ICON_16_DDVIEW, _OtherIcon, ACAD.TB_VIEWPOINT)]
             [--]
ID_3dorbit [_Button("3D Orbit", ICON_16_3DORBIT, ICON_16_3DORBIT)]^C^C_3dorbit
ID_Pan       [_Button("Pan Realtime", ICON_16_RTPAN, ICON_16_RTPAN)]'_pan
ID_ZoomRealt [_Button("Zoom Realtime", ICON_16_RTZOOM, ICON_16_RTZOOM)]'_zoom ;
ID_TbZoom    [_Flyout("Zoom", ICON_16_ZOOM, ICON_16_ZOOM, _OtherIcon, ACAD.TB_ZOOM)]
ID_ZoomPrevi [_Button("Zoom Previous", ICON_16_ZOOPRE, ICON_16_ZOOPRE)]'_zoom _p
             [--]
ID_Content  [_Button("AutoCAD DesignCenter", ICON_16_OPTCONTENTX, ICON_16_OPTCONTENTX)]$M=$(if,$(and,$(getvar,adcstate),1),'_adcclose,'_adcenter)
ID_Ai_propch [_Button("Properties", ICON_16_MODIFY, ICON_16_MODIFY)]$M=$(if,$(and,$(getvar,opmstate),1),^C^C_propertiesclose,^C^C_properties)
ID_dbConnect [_Button("dbConnect", ICON_16_DBCONNECT, ICON_16_DBCONNECT)]$M=$(if,$(and,$(getvar,dbcstate),1),^C^C_dbcClose,^C^C_dbConnect)
 	     [--]
ID_Help      [_Button("Help", ICON_16_HELP, ICON_16_HELP)]'_help

**TB_SURFACES
ID_TbSurface [_Toolbar("Surfaces", _Floating, _Hide, 100, 290, 1)]
ID_Solid     [_Button("2D Solid", ICON_16_SOLID, ICON_16_SOLID)]^C^C_solid
ID_3dface    [_Button("3D Face", ICON_16_3DFACE, ICON_16_3DFACE)]^C^C_3dface
             [--]
ID_Ai_box    [_Button("Box", ICON_16_SURBOX, ICON_16_SURBOX)]^C^C_ai_box
ID_Ai_wedge  [_Button("Wedge", ICON_16_SURWED, ICON_16_SURWED)]^C^C_ai_wedge
ID_Ai_pyrami [_Button("Pyramid", ICON_16_SURPYR, ICON_16_SURPYR)]^C^C_ai_pyramid
ID_Ai_cone   [_Button("Cone", ICON_16_SURCON, ICON_16_SURCON)]^C^C_ai_cone
ID_Ai_sphere [_Button("Sphere", ICON_16_SURSPH, ICON_16_SURSPH)]^C^C_ai_sphere
ID_Ai_dome   [_Button("Dome", ICON_16_SURDOM, ICON_16_SURDOM)]^C^C_ai_dome
ID_Ai_dish   [_Button("Dish", ICON_16_SURDIS, ICON_16_SURDIS)]^C^C_ai_dish
ID_Ai_torus  [_Button("Torus", ICON_16_SURTOR, ICON_16_SURTOR)]^C^C_ai_torus
             [--]
ID_Edge      [_Button("Edge", ICON_16_EDGE, ICON_16_EDGE)]^C^C_edge
ID_3dmesh    [_Button("3D Mesh", ICON_16_3DMESH, ICON_16_3DMESH)]^C^C_3dmesh
             [--]
ID_Revsurf   [_Button("Revolved Surface", ICON_16_REVSUR, ICON_16_REVSUR)]^C^C_revsurf
ID_Tabsurf   [_Button("Tabulated Surface", ICON_16_TABSUR, ICON_16_TABSUR)]^C^C_tabsurf
ID_Rulesurf  [_Button("Ruled Surface", ICON_16_RULESU, ICON_16_RULESU)]^C^C_rulesurf
ID_Edgesurf  [_Button("Edge Surface", ICON_16_EDGESU, ICON_16_EDGESU)]^C^C_edgesurf

**TB_UCS
ID_TbUcs     [_Toolbar("UCS", _Floating, _Hide, 100, 310, 1)]
ID_Ucs       [_Button("UCS", ICON_16_UCS, ICON_16_UCS)]^C^C_ucs
ID_Dducs     [_Button("Display UCS Dialog", ICON_16_DDUCS, ICON_16_DDUCS)]^C^C_+ucsman 0
             [--]
ID_UcsPrevio [_Button("UCS Previous", ICON_16_UCSPRE, ICON_16_UCSPRE)]^C^C_ucs _p
             [--]
ID_UcsWorld  [_Button("World UCS", ICON_16_UCSW, ICON_16_UCSW)]^C^C_ucs _w
ID_UcsObject [_Button("Object UCS", ICON_16_UCSOBJ, ICON_16_UCSOBJ)]^C^C_ucs _ob
ID_UcsFace   [_Button("Face UCS", ICON_16_UCSFACE, ICON_16_UCSFACE)]^C^C_ucs _fa
ID_UcsView   [_Button("View UCS", ICON_16_UCSVIE, ICON_16_UCSVIE)]^C^C_ucs _v
             [--]
ID_UcsOrigin [_Button("Origin UCS", ICON_16_UCSORI, ICON_16_UCSORI)]^C^C_ucs _o
ID_UcsZAxVec [_Button("Z Axis Vector UCS", ICON_16_UCSZAV, ICON_16_UCSZAV)]^C^C_ucs _zaxis
ID_Ucs3point [_Button("3 Point UCS", ICON_16_UCS3PT, ICON_16_UCS3PT)]^C^C_ucs _3
             [--]
ID_UcsXAxRot [_Button("X Axis Rotate UCS", ICON_16_UCSXAR, ICON_16_UCSXAR)]^C^C_ucs _x
ID_UcsYAxRot [_Button("Y Axis Rotate UCS", ICON_16_UCSYAR, ICON_16_UCSYAR)]^C^C_ucs _y
ID_UcsZAxRot [_Button("Z Axis Rotate UCS", ICON_16_UCSZAR, ICON_16_UCSZAR)]^C^C_ucs _z
             [--]
ID_UcsApply  [_Button("Apply UCS", ICON_16_UCSAPPLY, ICON_16_UCSAPPLY)]^C^C_ucs _apply

**TB_UCSII
ID_TbUcsName [_Toolbar("UCS II", _Floating, _Hide, 100, 300, 1)]
ID_Dducs     [_Button("Display UCS Dialog", ICON_16_DDUCS, ICON_16_DDUCS)]^C^C_+ucsman 0
ID_UcsMove   [_Button("Move UCS Origin", ICON_16_UCSMOVE, ICON_16_UCSMOVE)]^C^C_ucs _move
             [--]
ID_UcsCombo  [_Control(_UCSManager)]

**TB_VIEWPOINT
ID_TbViewpoi [_Toolbar("View", _Floating, _Hide, 100, 330, 1)]
ID_Ddview    [_Button("Named Views", ICON_16_DDVIEW, ICON_16_DDVIEW)]^C^C_view
             [--]
ID_VpointTop [_Button("Top View", ICON_16_VIETOP, ICON_16_VIETOP)]^C^C_-view _top
ID_VpointBot [_Button("Bottom View", ICON_16_VIEBOT, ICON_16_VIEBOT)]^C^C_-view _bottom
ID_VpointLef [_Button("Left View", ICON_16_VIELEF, ICON_16_VIELEF)]^C^C_-view _left
ID_VpointRig [_Button("Right View", ICON_16_VIERIG, ICON_16_VIERIG)]^C^C_-view _right
ID_VpointFro [_Button("Front View", ICON_16_VIEFRO, ICON_16_VIEFRO)]^C^C_-view _front
ID_VpointBac [_Button("Back View", ICON_16_VIEBAC, ICON_16_VIEBAC)]^C^C_-view _back
             [--]
ID_VpointSW  [_Button("SW Isometric View", ICON_16_VIESWI, ICON_16_VIESWI)]^C^C_-view _swiso
ID_VpointSE  [_Button("SE Isometric View", ICON_16_VIESEI, ICON_16_VIESEI)]^C^C_-view _seiso
ID_VpointNE  [_Button("NE Isometric View", ICON_16_VIENEI, ICON_16_VIENEI)]^C^C_-view _neiso
ID_VpointNW  [_Button("NW Isometric View", ICON_16_VIENWI, ICON_16_VIENWI)]^C^C_-view _nwiso
             [--]
ID_Camera    [_Button("Camera", ICON_16_CAMERA, ICON_16_CAMERA)]^C^C_camera

**TB_VIEWPORTS
ID_TbVpCreat [_Toolbar("Viewports", _Floating, _Hide, 100, 350, 1)]
ID_VpDialog  [_Button("Display Viewports Dialog", ICON_16_VPDLG, ICON_16_VPDLG)]^C^C_vports
ID_VpSingle  [_Button("Single Viewport", ICON_16_VPONE, ICON_16_VPONE)]$M=$(if,$(eq,$(getvar,tilemode),1),^C^C_-vports _si,^C^C_-vports)
ID_VpPoly    [_Button("Polygonal Viewport", ICON_16_VPPOLY, ICON_16_VPPOLY)]$M=$(if,$(eq,$(getvar,tilemode),0),^C^C_-vports _p,^C^C^P(ai_viewports_alert)^P) 
ID_VpConvert [_Button("Convert Object to Viewport", ICON_16_VPOBJ, ICON_16_VPOBJ)]$M=$(if,$(eq,$(getvar,tilemode),0),^C^C_-vports _o,^C^C^P(ai_viewports_alert)^P)
ID_VpClip    [_Button("Clip Existing Viewport", ICON_16_VPCLIP, ICON_16_VPCLIP)]^C^C_vpclip
             [--]
ID_VPScale   [_Control(_ViewportScale)]

**TB_ZOOM
ID_TbZoom    [_Toolbar("Zoom", _Floating, _Hide, 100, 350, 1)]
ID_ZoomWindo [_Button("Zoom Window", ICON_16_ZOOWIN, ICON_16_ZOOWIN)]'_zoom _w
ID_ZoomDynam [_Button("Zoom Dynamic", ICON_16_ZOODYN, ICON_16_ZOODYN)]'_zoom _d
ID_ZoomScale [_Button("Zoom Scale", ICON_16_ZOOSCA, ICON_16_ZOOSCA)]'_zoom _s
ID_ZoomCente [_Button("Zoom Center", ICON_16_ZOOCEN, ICON_16_ZOOCEN)]'_zoom _c
             [--]
ID_ZoomIn    [_Button("Zoom In", ICON_16_ZOOIN, ICON_16_ZOOIN)]'_zoom 2x
ID_ZoomOut   [_Button("Zoom Out", ICON_16_ZOOOUT, ICON_16_ZOOOUT)]'_zoom .5x
             [--]
ID_ZoomAll   [_Button("Zoom All", ICON_16_ZOOALL, ICON_16_ZOOALL)]'_zoom _all
ID_ZoomExten [_Button("Zoom Extents", ICON_16_ZOOEXT, ICON_16_ZOOEXT)]'_zoom _e

**TB_WEB
ID_TbWeb     [_Toolbar("Web", _Floating, _Hide, 100, 380, 1)]
ID_HlnkBack  [_Button("Go Back", ICON_16_HLNK_BACK, ICON_16_HLNK_BACK)]'_hyperlinkBack
ID_HlnkFwd   [_Button("Go Forward", ICON_16_HLNK_FWD, ICON_16_HLNK_FWD)]'_hyperlinkFwd
ID_HlnkStop  [_Button("Stop Navigation", ICON_16_HLNK_STOP, ICON_16_HLNK_STOP)]'_hyperlinkStop
ID_Browser   [_Button("Browse the Web", ICON_16_WEB, ICON_16_WEB)]^C^C_browser ;

//
//     Begin AutoCAD Image Menus
//

***image
**image_3DObjects
[3D Objects]
[acad(Box3d,Box3d)]^C^C_ai_box
[acad(Pyramid,Pyramid)]^C^C_ai_pyramid
[acad(Wedge,Wedge)]^C^C_ai_wedge
[acad(Dome,Dome)]^C^C_ai_dome
[acad(Sphere,Sphere)]^C^C_ai_sphere
[acad(Cone,Cone)]^C^C_ai_cone
[acad(Torus,Torus)]^C^C_ai_torus
[acad(Dish,Dish)]^C^C_ai_dish
[acad(Mesh,Mesh)]^C^C_ai_mesh

**image_poly
[Set Spline Fit Variables]
[acad(pm-quad,Quadric Fit Mesh)]'_surftype 5
[acad(pm-cubic,Cubic Fit Mesh)]'_surftype 6
[acad(pm-bezr,Bezier Fit Mesh)]'_surftype 8
[acad(pl-quad,Quadric Fit Pline)]'_splinetype 5
[acad(pl-cubic,Cubic Fit Pline)]'_splinetype 6

**image_vporti
[Tiled Viewport Layout]
[acad(vport-1,Single)]^C^C(ai_tiledvp 1 nil)
[acad(vport-3v,Three: Vertical)]^C^C(ai_tiledvp 3 "_V")
[acad(vport-3h,Three: Horizontal)]^C^C(ai_tiledvp 3 "_H")
[acad(vport-4,Four:  Equal)]^C^C(ai_tiledvp 4 nil)
[acad(vport-2v,Two:   Vertical)]^C^C(ai_tiledvp 2 "_V")
[acad(vport-3r,Three: Right)]^C^C(ai_tiledvp 3 "_R")
[acad(vport-3l,Three: Left)]^C^C(ai_tiledvp 3 "_L")
[acad(vport-4l,Four:  Left)]^C^C(ai_tiledvp 4 "_L")
[acad(vport-2h,Two:   Horizontal)]^C^C(ai_tiledvp 2 "_H")
[acad(vport-3a,Three: Above)]^C^C(ai_tiledvp 3 "_A")
[acad(vport-3b,Three: Below)]^C^C(ai_tiledvp 3 "_B")
[acad(vport-4r,Four:  Right)]^C^C(ai_tiledvp 4 "_R")

//
//  AutoCAD Screen Menus
//
//  There are two types of screen menus: command menus and options menus
//  Command menus provide access to the lists of AutoCAD commands.
//  Options menus provides access to the options available for individual commands.
//
//  There are 22 lines between menu titles.  This is one method for assuring that each time
//  that a menu is called that it overwrites the previous menu.
//
//  The organization of the command menus generally follows the organization of the pull-down menus.
//  A command has a screen menu item only if it has a pull-down menu item.
//  Command menus have, as much as possible, the same name as the equivalent pull-down menu.
//  Command menus have, as much as possible, the same items in the same order as the pull-down menus.
//
//  Command menus generally use the command name while pull-down menus offer a more descriptive title.
//  Items in command menus that call other command menus are in upper case.
//
//  Command menu names start with a number and are located after the special menus.
//
***SCREEN
**S
[AutoCAD ]^C^C^P(ai_rootmenus) ^P
[* * * * ]$S=ACAD.OSNAP
[FILE    ]$S=ACAD.01_FILE
[EDIT    ]$S=ACAD.02_EDIT
[VIEW 1  ]$S=ACAD.03_VIEW1
[VIEW 2  ]$S=ACAD.04_VIEW2
[INSERT  ]$S=ACAD.05_INSERT
[FORMAT  ]$S=ACAD.06_FORMAT
[TOOLS 1 ]$S=ACAD.07_TOOLS1
[TOOLS 2 ]$S=ACAD.08_TOOLS2
[DRAW 1  ]$S=ACAD.09_DRAW1
[DRAW 2  ]$S=ACAD.10_DRAW2
[DIMNSION]$S=ACAD.11_DIMENSION
[MODIFY1 ]$S=ACAD.12_MODIFY1
[MODIFY2 ]$S=ACAD.13_MODIFY2

[HELP    ]$S=ACAD.14_HELP







[ASSIST ]$S=ACAD.ASSIST
[LAST   ]$S=ACAD.

// The SNAP_TO menu can be called on high resolution displays to paint the snap
// options on the bottom of the screen menu.  
// To add lines to the bottom of the Root menu delete the next line.
**SNAP_TO 28
[Endpoint]_endp
[Midpoint]_mid
[Intersec]_int
[App Int ]_appint

[Center  ]_cen
[Quadrant]_qua
[Tangent ]_tan

[Perpend ]_per
[Node    ]_nod
[Insert  ]_ins

[Nearest ]_nea
[None    ]_non

[Tracking]_tt
[From    ]_from



**ASSIST 3
[Last    ]_l
[Previous]_p
[All     ]_all
[Cpolygon]_cp
[Wpolygon]_wp
[Fence   ]_f
[Group   ]_g
[Add     ]_a
[Remove  ]_r
[Undo    ]_u
[Filters ]_'filter
.x
.y
.z
.xy
.xz
.yz
[Osnap...]'_+dsettings 2
[Ddrmodes]'_+dsettings 0
[Layer   ]'_layer
[GroupDlg]^C^C_group
[OSNAP   ]$S=ACAD.OSNAP
**GRIP_EDIT 3
[Grip    ]
[ Edit   ]

[Move    ]_mo
[Mirror  ]_mi
[Rotate  ]_ro
[Scale   ]_sc
[Stretch ]_st

[Base Pt ]_b
[Copy    ]_c
[Referenc]_r
[Undo    ]_u

[Propchek]^C^C_properties
[GoTo URL]^C^C_gotourl

[Exit    ]_x
[Cancel  ]^C



**01_FILE 3
[New     ]^C^C_new
[Open    ]^C^C_open

[Qsave   ]^C^C_qsave
[Saveas  ]^C^C_saveas
[Export  ]^C^C_export

[Config  ]^C^C_config
[Plot    ]^C^C_plot

[Audit   ]^C^C_audit
[Recover ]^C^C_recover
[Purge   ]^C^C_purge

[Quit    ]^C^C_quit







**02_EDIT 3
[Undo    ]^C^C_u
[Redo    ]^C^C_redo

[Cut      ]^C^C_cutclip
[Copy     ]^C^C_copyclip
[CopyBase]^C^C_copybase
[CopyLink ]^C^C_copylink

[Paste    ]^C^C_pasteclip
[PasteBlk]^C^C_pasteblock
[PasteOri]^C^C_pasteorig
[PasteSpe ]^C^C_pastespec

[OLElinks]^C^C_olelinks








**03_VIEW1 3
[Redraw  ]'_redraw
[Redrawal]'_redrawall
[Regen   ]^C^C_regen
[Regenall]^C^C_regenall

[Zoom    ]'_zoom
[Pan     ]'_pan
[Dsviewer]'_dsviewer

[Tilemode]^C^C_tilemode
[Mspace  ]^C^C_mspace
[Pspace  ]^C^C_pspace

[Vports  ]^C^C_-vports
[Mview   ]^C^C_mview

[Ddview  ]^C^C_view
[Ddvpoint]^C^C_ddvpoint
[Plan    ]^C^C_plan
[Vpoint  ]^C^C_vpoint
[3dorbit ]^C^C_3dorbit

**04_VIEW2 3
[Hide    ]^C^C_hide
[Shade   ]^C^C_shademode

[Render  ]^C^C_render
[Scene   ]^C^C_scene
[Light   ]^C^C_light
[Mapping ]^C^C_setuv
[Backgrnd]^C^C_background
[Fog     ]^C^C_fog
[Lsnew   ]^C^C_lsnew
[Lsedit  ]^C^C_lsedit
[Lslib   ]^C^C_lslib
[Rmat    ]^C^C_rmat
[Matlib  ]^C^C_matlib
[Rpref   ]^C^C_rpref
[Stats   ]^C^C_stats

[UCSicon ]^C^C_ucsicon
[Attdisp ]'_attdisp

[Textscr ]'_textscr
[Toolbar ]^C^C_toolbar
**05_INSERT 3
[Ddinsert]^C^C_insert

[Xref    ]^C^C_xref
[Image   ]^C^C_image

[3DSin   ]^C^C_3dsin
[ACISin  ]^C^C_acisin
[DXBin   ]^C^C_dxbin
[WMFin   ]^C^C_wmfin
[PSin    ]^C^C_psin

[Insertob]^C^C_insertobj










**06_FORMAT 3
[Layer   ]'_layer
[Color ]'_color
[Linetype]'_linetype

[Style   ]'_style
[Ddim    ]'_dimstyle
[Ddptype ]'_ddptype
[Mlstyle ]^C^C_mlstyle

[Units ]'_units
[Thicknes]'_thickness
[Limits  ]'_limits

[Rename  ]^C^C_rename








**07_TOOLS1 3
[Spell   ]'_spell
[Drawordr]^C^C_draworder

[Dist    ]'_dist
[Area    ]^C^C_area
[Massprop]^C^C_massprop

[List    ]^C^C_list
[ID      ]'_id

[Time    ]'_time
[Status  ]'_status
[Setvar  ]'_setvar

[Appload ]^C^C_appload
[Script  ]'_script

[Saveimg ]^C^C_saveimg
[Replay  ]^C^C_replay



**08_TOOLS2 3
[Osnap...]'_+dsettings 2
[Grid    ]'_+dsettings 0
[Polar   ]'_+dsettings 1

[Ucsp    ]^C^C_+ucsman 1
[Ucsman  ]^C^C_+ucsman 0
[UCS     ]^C^C_ucs

[Grips   ]^C^C_+options 7
[Select  ]^C^C_+options 7
[Group   ]^C^C_group

[Tablet  ]^C^C_tablet
[Menuload]^C^C_menuload
[Options ]^C^C_options







**09_DRAW1 3
[Line    ]^C^C_line
[Ray     ]^C^C_ray
[Xline   ]^C^C_xline
[Mline   ]^C^C_mline

[Pline   ]^C^C_pline
[3Dpoly  ]^C^C_3dpoly
[Polygon ]^C^C_polygon
[Rectang ]^C^C_rectang

[Arc     ]^C^C_arc
[Circle  ]^C^C_circle
[Donut   ]^C^C_donut

[Spline  ]^C^C_spline
[Ellipse ]^C^C_ellipse






**10_DRAW2 3
[Bmake   ]^C^C_block
[Base    ]'_base
[Attdef  ]^C^C_attdef

[Point   ]*^C^C_point
[Divide  ]^C^C_divide
[Measure ]^C^C_measure

[Bhatch  ]^C^C_bhatch
[Boundary]^C^C_boundary

[Region  ]^C^C_region

[Mtext   ]^C^C_mtext
[Dtext   ]^C^C_dtext

[SURFACES]$S=ACAD.3D
[SOLIDS  ]$S=ACAD.101_SOLIDS




**101_SOLIDS 3
[Box     ]^C^C_box
[Sphere  ]^C^C_sphere
[Cylinder]^C^C_cylinder
[Cone    ]^C^C_cone
[Wedge   ]^C^C_wedge
[Torus   ]^C^C_torus

[Extrude ]^C^C_extrude
[Revolve ]^C^C_revolve

[Slice   ]^C^C_slice
[Section ]^C^C_section
[Interfer]^C^C_interfere

[Soldraw ]^C^C_soldraw
[Solview ]^C^C_solview
[Solprof ]^C^C_solprof





**11_DIMENSION 3
[Linear  ]^C^C_dimlinear
[Aligned ]^C^C_dimaligned
[Ordinate]^C^C_dimordinate

[Diameter]^C^C_dimdiameter
[Radius  ]^C^C_dimradius
[Angular ]^C^C_dimangular

[Baseline]^C^C_dimbaseline
[Continue]^C^C_dimcontinue

[Leader  ]^C^C_qleader
[Toleranc]^C^C_tolerance
[Center  ]^C^C_dimcenter

[Dimedit ]^C^C_dimedit
[Dimtedit]^C^C_dimtedit

[Ddim    ]'_dimstyle
[Dimstyle]^C^C_-dimstyle
[Update  ]^C^C_dim _update

**12_MODIFY1 3
[Property]^C^C_properties
[MatchPrp]'_matchprop
[Xbind   ]^C^C_xbind
[Imageadj]^C^C_imageadjust
[Imagequa]^C^C_imagequality
[Transpar]^C^C_transparency
[Imagefrm]^C^C_imageframe
[Xclip   ]^C^C_xclip
[Imageclp]^C^C_imageclip
[Hatchedt]^C^C_hatchedit
[Pedit   ]^C^C_pedit
[Splinedt]^C^C_splinedit
[Mledit  ]^C^C_mledit
[Attedit  ]^C^C_attedit
[-Attedit ]^C^C_-attedit
[Ddedit  ]^C^C_ddedit

[Erase   ]^C^C_erase
[Copy    ]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_copy,^C^C_copy)
[Mirror  ]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_mirror,^C^C_mirror)
[Offset  ]^C^C_offset
[Array   ]^C^C_array
**13_MODIFY2 3
[Refedit ]^C^C_refedit;

[Move    ]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_move,^C^C_move)
[Rotate  ]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_rotate,^C^C_rotate)
[Scale   ]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_scale,^C^C_scale)
[Stretch ]$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),grip),_stretch,^C^C_stretch)
[Lengthen]^C^C_lengthen
[Trim    ]^C^C_trim
[Extend  ]^C^C_extend
[Break   ]^C^C_break
[Chamfer ]^C^C_chamfer
[Fillet  ]^C^C_fillet

[3Darray ]^C^C_3darray
[Mirror3D]^C^C_mirror3d
[Rotate3D]^C^C_rotate3d
[Align   ]^C^C_align

[Union   ]^C^C_union
[Subtract]^C^C_subtract
[Intrsect]^C^C_intersect
[Explode ]^C^C_explode
**14_HELP 3
[Help    ]'_help

[WhatsNew]^P(help "acad_ug" "whatsnew") ^P
[Browser ]^C^C_browser ;

[About   ]'_about















//
//  Here begins the command options menus
//  Only commands that have command line options are included here.
//  - Commands that immediately call dialog boxes do not havre screen menus.
//  - Commands with no options (example: Ray) do not have screen menus.
//  Commands are listed in alphabetical order.
//  Commands and system variables are followed by a colon.
//  Command options and sub-options do not have colons.
//
**3D 3
[Solid:  ]^C^C_solid
[3Dface  ]^C^C_3dface
[3Dobjec:]$I=ACAD.image_3dobjects $I=ACAD.*

[Edge:   ]^C^C_edge
[3Dmesh: ]^C^C_3dmesh


[Revsurf:]^C^C_revsurf
[Tabsurf:]^C^C_tabsurf
[Rulsurf:]^C^C_rulesurf
[Edgsurf:]^C^C_edgesurf

[Surftb1:]'_surftab1
[Surftb2:]'_surftab2
[PolyVars]$I=ACAD.image_poly $I=*






**3DARRAY 3
[3Darray:]^C^C_3darray

[Rectang ]_r
[Polar   ]_p

[Yes     ]_y
[No      ]_n















**3DFACE 3
[3Dface: ]^C^C_3dface

[Invisibl]_i

[ShowEdge]^P(setvar "splframe" 1)(ai_showedge_alert) ^P
[HideEdge]^P(setvar "splframe" 0)(ai_hideedge_alert) ^P

[Edge:   ]^C^C_edge
[Property]^C^C_properties













**3DPOLY 3
[3Dpoly: ]^C^C_3dpoly

[Close   ]_c
[Undo    ]_u

@
















**ARC 3
[Arc:    ]^C^C_arc

[3 Point ]\\
[St,C,End]\_c \
[St,C,Ang]\_c \_a
[St,C,Len]\_c \_l
[St,E,Ang]\_e \_a
[St,E,Dir]\_e \_d
[St,E,Rad]\_e \_r
[Ce,S,End]_c \\
[Ce,S,Ang]_c \\_a
[Ce,S,Len]_c \\_l

[ArcCont:]^C^C_arc ;
[LinCont:]^C^C_line ;







**AREA 3
[Area:   ]^C^C_area

[Object  ]_o
[Add     ]_a
[Subtract]_s

[Boundar:]^C^C_boundary















**ARRAY 3
[Array:  ]^C^C_array



[Rectang ]_r
[Polar   ]_p

[Yes     ]_y
[No      ]_n













**ATTDISP 3
[Attdisp:]'_attdisp

[Normal  ]_n
[On      ]_on
[Off     ]_off

















**ATTEDIT 3
[-Attedit:]^C^C_-attedit

[Attedit: ]^C^C_attedit

[Yes     ]_y
[No      ]_n

[Value   ]_v
[Position]_p
[Height  ]_h
[Angle   ]_a
[Style   ]_s
[Layer   ]_l
[Color   ]_c
[Next    ]_n

[ColorDlg](acad_colordlg 256)





**AUDIT 3
[Audit:  ]^C^C_audit

[Yes     ]_y
[No      ]_n

[Auditct:]'_auditctl
















**BREAK 3
[Break:  ]^C^C_break

[First   ]_f
@

[Sel, 2nd]\\
[Sel Pt  ]\@
[Sel,2Pts]\_first \
[Sel, 1st]\_first \@













**CHAMFER 3
[Chamfer:]^C^C_chamfer

[Polyline]_p
[Distance]_d \\_chamfer
[Dist = 0]_d 0 0 _chamfer
[Angle   ]_a \\ _chamfer

[Trim    ]_t
[No Trim ]_n

[Method  ]_m
[Distance]_d
[Angle   ]_a









**CIRCLE 3
[Circle: ]^C^C_circle

[Cen,Rad ]\\

[Cen,Dia ]\_d

[2 Point ]_2p \
[3 Point ]_3p \\

[TTR     ]_ttr
[TanTanTa]_3p _tan \_tan \_tan \

[CopyRad:]^C^C_circlerad '_cal rad;









**COPY 3
[Copy:   ]^C^C_copy



[Multiple]_m

















**DIMALIGNED 3
[DimAlin:]^C^C_dimaligned

[Text    ]_t
[Angle   ]_a


















**DIMANGULAR 3
[DimAngl:]^C^C_dimangular

[Text    ]_t
[Angle   ]_a


















**DIMEDIT 3
[DimEdit:]^C^C_dimedit

[Home    ]_h
[New     ]_n
[Rotate  ]_r
[Oblique ]_o
















**DIMLINEAR 3
[DimLinr:]^C^C_dimlinear

[Horizont]_h
[Vertical]_v

[Text    ]_t
[Angle   ]_a















**DIMORDINATE 3
[DimOrdin]^C^C_dimordinate

[Xdatum  ]_x
[Ydatum  ]_y


















**DIMOVERRIDE 3
[DimOver:]^C^C_dimoverride

[Clear   ]_c



















**DIMTEDIT 3
[DimTedt:]^C^C_dimtedit

[Left    ]_l
[Right   ]_r
[Home    ]_h
[Angle   ]_a
















**DIVIDE 3
[Divide: ]^C^C_divide

[Block   ]_b

[Yes     ]_y
[No      ]_n
















**DRAWORDER 3
[Draword:]^C^C_draworder

[Above   ]_a
[Under   ]_u

[Front   ]_f
[Back    ]_b















**DTEXT 3
[Dtext:  ]^C^C_dtext
[Mtext:  ]^C^C_mtext

[Style   ]_s

[Justify ]_j
[Align   ]_a
[Center  ]_c
[Fit     ]_f
[Middle  ]_m
[Right   ]_r
[Top Left]_tl
[Top Cent]_tc
[Top Rght]_tr
[Mid Left]_ml
[Mid Cent]_mc
[Mid Rght]_mr
[Bot Left]_bl
[Bot Cent]_bc
[Bot Rght]_br

[Style:  ]'_style
**DVIEW 3
[3dorbit:  ]^C^C_3dorbit

[Dvwblok:]^C^C_dview ;

[Camera  ]_ca
[Target  ]_ta
[Distance]_d
[Points  ]_po
[Pan     ]_pa
[Zoom    ]_z
[Twist   ]_tw
[Clip    ]_cl
[Hide    ]_h
[Off     ]_off
[Undo    ]_u
[Exit    ]_x

[Back    ]_b
[Front   ]_f

[Off     ]_off

**ELLIPSE 3
[Ellipse:]^C^C_ellipse

[Arc     ]_a
[Center  ]_c
[Rotation]_r




[Pellips:]'_pellipse












**ERASE 3
[Erase:  ]^C^C_erase

[Oops:   ]^C^C_oops



















**EXTEND 3
[Extend: ]^C^C_extend

[Edge    ]_e
[ Extend ]_e
[ NoExten]_n

[Project ]_p
[ None   ]_n
[ UCS    ]_u
[ View   ]_v

[Undo    ]_u










**EXTRUDE 3
[Extrude:]^C^C_extrude

[Path    ]_p



















**FILLET 3
[Fillet: ]^C^C_fillet

[Polyline]_p

[Radius  ]_r
[Radius 0]_r 0

[Trim    ]_t
[No Trim ]_n













**IMAGECLIP 3
[Imagclp:]^C^C_imageclip

[New    ];
[On     ]_on
[Off    ]_off
[Delete ]_d


[Polygon]_p
[Rectang];












**IMAGEQUALITY 3
[Imagqua:]^C^C_imagequality

[High    ]_h
[Draft   ]_d


















**LEADER 3
[Leader: ]^C^C_qleader

[Format  ]_f
[Undo    ]_u


















**LENGTHEN 3
[Lengthn:]^C^C_lengthen

[Delta   ]_de
[Percent ]_p
[Total   ]_t
[Dynamic ]_dy

[Angle   ]_a
[Length  ]_l
[Undo    ]_u












**LINE 3
[Line:   ]^C^C_line

[1 Line: ]^C^C_line \\;

[Continue];
[Undo    ]_u
[Close   ]_c
@

[ArcCont:]^C^C_arc ;












**MATCHPROP 3
[Matchpr:]'_matchprop

[Settings]_s



















**MEASURE 3
[Measure:]^C^C_measure

[Block   ]_b

[Yes     ]_y
[No      ]_n
















**MIRROR 3
[Mirror: ]^C^C_mirror

[Mirror3:]^C^C_mirror3d

[Yes     ]_y
[No      ]_n

[Mirrtex:]'_mirrtext














**MIRROR3D 3
[Mirror3:]^C^C_mirror3d

[Entity  ]_e
[Z Axis  ]_z
[View    ]_v
[XY      ]_xy
[YZ      ]_yz
[ZX      ]_zx
[3 Point ]_3













**MLINE 3
[Mline:  ]^C^C_mline

[Justify ]_j
[Scale   ]_s
[Style   ]_st

[Undo    ]_u
[Close   ]_c
@

[Mlstyle:]^C^C_mlstyle
[Mledit  ]^C^C_mledit










**MVIEW 3
[Mview:  ]^C^C_mview

[On      ]_on
[Off     ]_off
[Hideplot]_h
[Fit     ]_f
2
3
4
[Restore ]_r












**OFFSET 3
[Offset: ]^C^C_offset

[Through ]_t



















**OSNAP 3
[Tracking]_tt
[From    ]_from

[Osnap:  ]'_-osnap

[Endpoint]_endp
[Midpoint]_mid
[Intersec]_int
[App Int ]_appint
[Extens  ]_ext
[Parallel]_par

[Center  ]_cen
[Quadrant]_qua
[Tangent ]_tan
[Perpend ]_per
[Node    ]_nod
[Insert  ]_ins
[Nearest ]_nea
[None    ]_non

[Osnap...]'_+dsettings 2
**PEDIT 3
[Pedit:  ]^C^C_pedit
[Break   ]_b
[Close   ]_c
[Down/Dec]_d
[Ed Vertx]_e
[Fit     ]_f
[Go      ]_g
[Insert  ]_i
[Join    ]_j
[LtypeGen]_l
[Move/Opn]_m
[Next/Opn]_n
[Open    ]_o
[Prev    ]_p
[Regen/Rt]_r
[REdispla]_re
[Spln/Str]_s
[Tan     ]_t
[Undo/Up ]_u
[Width   ]_w
[eXit    ]_x
[Polyvars]$I=ACAD.image_poly $I=*
**PLAN 3
[Plan:   ]^C^C_plan

[Current ]_c
[UCS     ]_u
[World   ]_w

[Follow:]'_ucsfollow















**PLINE 3
[Pline:  ]^C^C_pline

[Arc     ]_a
[Close   ]_c
[Halfwid ]_h
[Length  ]_l
[Undo    ]_u
[Width   ]_w

[Angle   ]_a
[Center  ]_ce
[Close   ]_cl
[Direct'n]_d \
[Line    ]_l
[Radius  ]_r
[2nd Pt  ]_s \

[Pedit   ]^C^C_pedit




**POINT 3
[Point:  ]*^C^C_point

[Ddptype:]'_ddptype

[Pdmode: ]'_pdmode
[Pdsize: ]'_pdsize
















**POLYGON 3
[Polygon:]^C^C_polygon

[Edge    ]_e

[I-scribe]_i
[C-scribe]_c
















**PURGE 3
[Purge:  ]^C^C_purge

[Blocks  ]_b
[Dimstyle]_d
[Layers  ]_la
[Ltypes  ]_lt
[Shapes  ]_sh
[Styles  ]_st
[All     ]_a

[Yes     ]_y
[No      ]_n










**REVOLVE 3
[Revolve:]^C^C_revolve

[Object  ]_o
[X Axis  ]_x
[Y Axis  ]_y

















**ROTATE 3
[Rotate: ]^C^C_rotate

[Referenc]_r

[Rotate3:]^C^C_rotate3d

















**ROTATE3D 3
[Rotat3d:]^C^C_rotate3d

[Entity  ]_e
[Last    ]_l
[View    ]_v
[X Axis  ]_x
[Y Axis  ]_y
[Z Axis  ]_z
[2 Points]_2p













**SCALE 3
[Scale:  ]^C^C_scale

[Referenc]_r



















**SECTION 3
[Section:]^C^C_section

[Object  ]_o
[Z Axis   ]_z
[View    ]_v
[XY      ]_xy
[YZ      ]_yz
[ZX      ]_zx
[3 Point ]_3p













**SETVAR 3
[Setvar: ]'_setvar

[List    ]?
*


















**SHADEMODE 3
[Shade:  ]^C^C_shademode

[ 2D Wire]_2
[ 3D Wire]_3
[ Hidden ]_h
[ Flat   ]_f
[ Gouraud]_g
[ Flat+W ]_l
[ Gour+W ]_o

[Shadedif]'_shadedif

[Regen:  ]^C^C_regen









**SLICE 3
[Slice:  ]^C^C_slice

[Object  ]_o
[Z Axis  ]_z
[View    ]_v
[XY      ]_xy
[YZ      ]_yz
[ZX      ]_zx
[3 Point ]_3p













**SPLINE 3
[Spline: ]^C^C_spline

[Object  ]_o

[Close   ]_c
[Fit Tol ]_f

[Splframe]'_splframe














**SPLINEDIT 3
[Splnedt:]^C^C_splinedit

[Fit     ]_fit
[Add     ]_add
[Delete  ]_delete
[Move    ]_move
[Purge   ]_purge
[Tangents]_tangents
[Toleranc]_tolerance
[Close   ]_c
[Open    ]_o
[MoveVert]_v
[Next    ]_n
[Previous]_p
[Select  ]_s
[Refine  ]_r
[AddPoint]_a
[ElevOrdr]_e
[Weight  ]_w
[Reverse ]_e
[Undo    ]_u
[Exit    ]_x
**TABLET 3
[Tablet: ]^C^C_tablet

[Calibrat]_cal
[Config  ]_cfg 4 \\\25 9 \\\11 9 \\\9 13 \\\25 7 _y \\_y
[Reconfig]_cfg 4 _y \\\;;\\\;;\\\;;\\\;;_y \\
[Re-DfCfg]_cfg 4 _y \\\25 9 \\\11 9 \\\9 13 \\\25 7 _y \\

[On      ]_on
[Off     ]_off
[Yes     ]_y
[No      ]_n

[Orthognl]_o
[Affine  ]_a
[Projectv]_p







**TRIM 3
[Trim:   ]^C^C_trim

[Mledit  ]_e
[ Extend ]_e
[ NoExten]_n

[Project ]_p
[ None   ]_n
[ UCS    ]_u
[ View   ]_v

[Undo    ]_u










**UCS 3
[UCS:    ]^C^C_ucs

[Origin  ]_o
[Z Axis  ]_z
[3 Point ]_3p
[X       ]_x
[Y       ]_y
[Z       ]_z
[Entity  ]_e
[View    ]_v
[Previous]_p
[Restore ]_r
[Save    ]_s
[Delete  ]_d
[List    ]?
[World   ]_w

[Ucsman: ]^C^C_+ucsman 0
[Ucsp:   ]^C^C_+ucsman 1
[Follow: ]'_ucsfollow
[UCSicon:]^C^C_ucsicon

**UCSICON 3
[UCSicon:]^C^C_ucsicon

[On      ]_on
[Off     ]_off

[All     ]_all
[Origin  ]_or
[NoOrigin]_n














**VIEW 3
[View:   ]'_-view

[List    ]_?
[Delete  ]_d
[Restore ]_r
[Save    ]_s
[Window  ]_w


[Pan:    ]'_pan
[Zoom:   ]'_zoom

[Ddview: ]^C^C_view
[Plan:   ]^C^C_plan
[Dview:  ]^C^C_dview







**VIEWPORTS 3
[Vports: ]^C^C_vports
[Layout  ]^C^C^P(ai_tiledvp_chk T) ^P

[Save    ]_s
[Restore ]_r
[Delete  ]_d
[Join    ]_j
[Single  ]_s
?
2
3
4

[Horizont]_h
[Vertical]_v
[Above   ]_a
[Below   ]_b
[Left    ]_l
[Right   ]_r



**VPOINT 3
[Vpoint: ]^C^C_vpoint

[Rotate  ]_r
[Axes    ] ;


[Top     ]_non *0,0,1
[Bottom  ]_non *0,0,-1
[Left    ]_non *-1,0,0
[Right   ]_non *1,0,0
[Front   ]_non *0,-1,0
[Back    ]_non *0,1,0

[Iso SW  ]_non *-1,-1,1
[Iso SE  ]_non *1,-1,1
[Iso NE  ]_non *1,1,1
[Iso NW  ]_non *-1,1,1

[Ddvpoint]^C^C_ddvpoint
[Ddview: ]^C^C_view
[Plan:   ]^C^C_plan
[Dview:  ]^C^C_dview
**VPORTS 3
[Vports: ]^C^C_vports
[Layout: ]^C^C^P(ai_tiledvp_chk T) ^P

[Save    ]_s
[Restore ]_r
[Delete  ]_d
[Join    ]_j
[Single  ]_si
?
2
3
4

[Horizont]_h
[Vertical]_v
[Above   ]_a
[Below   ]_b
[Left    ]_l
[Right   ]_r



**XCLIP 3
[Xclip:  ]^C^C_xclip

[On      ]_on
[Off     ]_off

[Clipdpth]_c
[Delete  ]_d
[Polyline]_p


[Select  ]_s
[Polygon ]_p
[Rectang ];









**XLINE 3
[Xline:  ]^C^C_xline

[Horizont]_h
[Vertical]_v
[Angle   ]_a
[Bisect  ]_b
[Offset  ]_o


[Ray:    ]^C^C_ray












**ZOOM 3
[Zoom:   ]'_zoom

[Realtime];

[Previous]_p
[Window  ]_w
[Dynamic ]_d
[Scale   ]_s
[Center  ]_c

[In      ]2x
[Out     ].5x

[All     ]_a
[Extents ]_e







**ENDSCREEN

//
//      Begin AutoCAD Tablet Menus
//
//      This is the TABLET1 menu.  You may put your own
//      macros and menu items here in these spaces.
//      All of the "blank" line items actually contain a
//      backslash so that no command is issued when you pick any
//      of them from the tablet.  Remove them if you want an Enter
//      to happen when they are selected, or place your own
//      macros in their place.

***TABLET1
**TABLET1STD
[A-1]\
[A-2]\
[A-3]\
[A-4]\
[A-5]\
[A-6]\
[A-7]\
[A-8]\
[A-9]\
[A-10]\
[A-11]\
[A-12]\
[A-13]\
[A-14]\
[A-15]\
[A-16]\
[A-17]\
[A-18]\
[A-19]\
[A-20]\
[A-21]\
[A-22]\
[A-23]\
[A-24]\
[A-25]\
[B-1]\
[B-2]\
[B-3]\
[B-4]\
[B-5]\
[B-6]\
[B-7]\
[B-8]\
[B-9]\
[B-10]\
[B-11]\
[B-12]\
[B-13]\
[B-14]\
[B-15]\
[B-16]\
[B-17]\
[B-18]\
[B-19]\
[B-20]\
[B-21]\
[B-22]\
[B-23]\
[B-24]\
[B-25]\
[C-1]\
[C-2]\
[C-3]\
[C-4]\
[C-5]\
[C-6]\
[C-7]\
[C-8]\
[C-9]\
[C-10]\
[C-11]\
[C-12]\
[C-13]\
[C-14]\
[C-15]\
[C-16]\
[C-17]\
[C-18]\
[C-19]\
[C-20]\
[C-21]\
[C-22]\
[C-23]\
[C-24]\
[C-25]\
[D-1]\
[D-2]\
[D-3]\
[D-4]\
[D-5]\
[D-6]\
[D-7]\
[D-8]\
[D-9]\
[D-10]\
[D-11]\
[D-12]\
[D-13]\
[D-14]\
[D-15]\
[D-16]\
[D-17]\
[D-18]\
[D-19]\
[D-20]\
[D-21]\
[D-22]\
[D-23]\
[D-24]\
[D-25]\
[E-1]\
[E-2]\
[E-3]\
[E-4]\
[E-5]\
[E-6]\
[E-7]\
[E-8]\
[E-9]\
[E-10]\
[E-11]\
[E-12]\
[E-13]\
[E-14]\
[E-15]\
[E-16]\
[E-17]\
[E-18]\
[E-19]\
[E-20]\
[E-21]\
[E-22]\
[E-23]\
[E-24]\
[E-25]\
[F-1]\
[F-2]\
[F-3]\
[F-4]\
[F-5]\
[F-6]\
[F-7]\
[F-8]\
[F-9]\
[F-10]\
[F-11]\
[F-12]\
[F-13]\
[F-14]\
[F-15]\
[F-16]\
[F-17]\
[F-18]\
[F-19]\
[F-20]\
[F-21]\
[F-22]\
[F-23]\
[F-24]\
[F-25]\
[G-1]\
[G-2]\
[G-3]\
[G-4]\
[G-5]\
[G-6]\
[G-7]\
[G-8]\
[G-9]\
[G-10]\
[G-11]\
[G-12]\
[G-13]\
[G-14]\
[G-15]\
[G-16]\
[G-17]\
[G-18]\
[G-19]\
[G-20]\
[G-21]\
[G-22]\
[G-23]\
[G-24]\
[G-25]\
[H-1]\
[H-2]\
[H-3]\
[H-4]\
[H-5]\
[H-6]\
[H-7]\
[H-8]\
[H-9]\
[H-10]\
[H-11]\
[H-12]\
[H-13]\
[H-14]\
[H-15]\
[H-16]\
[H-17]\
[H-18]\
[H-19]\
[H-20]\
[H-21]\
[H-22]\
[H-23]\
[H-24]\
[H-25]\
[I-1]\
[I-2]\
[I-3]\
[I-4]\
[I-5]\
[I-6]\
[I-7]\
[I-8]\
[I-9]\
[I-10]\
[I-11]\
[I-12]\
[I-13]\
[I-14]\
[I-15]\
[I-16]\
[I-17]\
[I-18]\
[I-19]\
[I-20]\
[I-21]\
[I-22]\
[I-23]\
[I-24]\
[I-25]\
**ENDTAB1

//      TABLET2 menu.
//      Rows: J to R (9) 
//      Columns: 11       
//
***TABLET2
**TABLET2STD
// Row J View
^C^C_regen
'_zoom _e
'_zoom _a
'_zoom _w
'_zoom _p
[Draw]\
^C^C_box
^C^C_mtext
^C^C_circle
^C^C_line
^C^C
// Row K View
^C^C_regenall
'_dsviewer
'_zoom _c
'_zoom .5x
'_zoom 2x
[Draw]\
^C^C_sphere
^C^C_dtext
^C^C_donut
^C^C_ray
'_zoom ;
//  Row L View
'_attdisp
^C^C_ucsicon
^C^C_tilemode 1 
^C^C^P_mspace ^P
^C^C^P_pspace ^P
[Draw]\
^C^C_cylinder
^C^C_solid
^C^C_spline
^C^C_xline
'_zoom ;
// Row M View
^C^C_render
^C^C_hide
^C^C_vports
^C^C_vports
^C^C_view
[Draw]\
^C^C_cone
^C^C_3dface
^C^C_ellipse
^C^C_mline
'_zoom ;
//  Row N View
^C^C_scene
^C^C_shade
^C^C_plan
^C^C_vpoint
^C^C_ddvpoint
[Draw]\
^C^C_wedge
$I=ACAD.image_3dobjects $I=ACAD.*
^C^C_block
^C^C_pline
'_pan
// Row O View
^C^C_light
^C^C_shademode
//
'_-view _nwiso
'_-view _back
'_-view _neiso
[Draw]\
^C^C_torus
^C^C_revsurf
*^C^C_point
^C^C_3dpoly
'_pan
//  Row P  View
^C^C_rmat
^C^C_fog
//
'_-view _left
'_-view _top
'_-view _right
[Draw]\
^C^C_extrude
^C^C_tabsurf
^C^C_bhatch
^C^C_polygon
'_pan
//  Row Q View
^C^C_matlib
^C^C_background
//
'_-view _swiso
'_-view _front
'_-view _seiso
[Draw]\
^C^C_revolve
^C^C_rulesurf
^C^C_boundary
^C^C_rectang
'_redrawall
//  Row R  View
^C^C_setuv
^C^C_rpref
//
^C^C_toolbar
'_-view _bottom
^C^C_3dorbit
[Draw]\
^C^C_qleader
^C^C_edgesurf
^C^C_region
^C^C_arc
'_redrawall
**ENDTAB2

//      TABLET3 menu.  
//      This tablet menu is 9 colums wide by 13 rows high.
//      The equivalent area on the tablet drawing shows an empty column followed by three colums
//      that are slightly narrower than the normal columns.
//      The 9 tablet menu columns are used as follows:
//      -  3 tablet menu columns for the blank column in the tablet drawing
//      -  2 tablet menu columns for each of the 3 narrow tablet drawing columns 
//
***TABLET3
**TABLET3STD
//  Row 1
\
\
\
<<135
<<135
<<90
<<90
<<45
<<45
//  Row 2
\
\
\
<<180
<<180
<\
<\
<<0
<<0
//  Row 3
\
\
\
<<225
<<225
<<270
<<270
<<315
<<315
//  Row 4
\
\
\
^H
^H
^H
^H
^H
^H
//  Row 5
\
\
\
7/8\
7/8\
/16\
/16\
/32\
/32\
//  Row 6
\
\
\
1/2\
1/2\
5/8\
5/8\
3/4\
3/4\
//  Row 7
\
\
\
1/8\
1/8\
1/4\
1/4\
3/8\
3/8\
//  Row 8
\
\
\
-\
-\
/\
/\
X\
X\
//  Row 9
\
\
\
@\
@\
'\
'\
"\
"\
//  Row 10
\
\
\
7\
7\
8\
8\
9\
9\
//  Row 11
\
\
\
4\
4\
5\
5\
6\
6\
//  Row 12
\
\
\
1\
1\
2\
2\
3\
3\
//  Row 13
\
\
\
0\
0\
.\
.\
,\
,\
**ENDTAB3

//      This is the TABLET4 menu.  
//      It has been updated for this release.
//
***TABLET4
**TABLET4STD
//  Row S
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
\
//  Row T Insert
^C^C_insertobj
^C^C_import
^C^C_image
^C^C_xref
^C^C_insert
[Tool]\
^C^C_area
'_dist
^C^C_draworder
'_spell
[Edit]\
^C^C_u
^C^C_cutclip
^C^C_copyclip
//  Snap
_parallel
_endpoint
_midpoint
_intersect
_appint
_center
_quadrant
_tangent
[File]\
^C^C_new
^C^C_open
//  Row U Format
'_ddptype
'_style
'_linetype
'_color
'_layer
[Tool]\
^C^C_massprop
^C^C_list
'_id
'_setvar
[Edit]\
^C^C_redo
^C^C_pasteclip
^C^C_erase
// Snap
_from
_perpend
_insert
_node
_nearest
_extension
_none
'_+dsettings 2
[File]\
^C^C_qsave
^C^C_qsave
//  Row V Format
^C^C_rename
'_limits
'_thickness
'_units
^C^C_mlstyle
\
^C^C_saveimg
^C^C_replay
'_script
^C^C_appload
\
^C^C_measure
^C^C_divide
//
^C^C_erase
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_copy,^C^C_copy)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_mirror,^C^C_mirror)
^C^C_offset
^C^C_array
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_move,^C^C_move)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_rotate,^C^C_rotate)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_scale,^C^C_scale)
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,4),GRIP),_stretch,^C^C_stretch)
\
^C^C_saveas
^C^C_pagesetup
//  Row W
^C^C_qdim
^C^C_qleader
^C^C_dimordinate
^C^C_dimaligned
^C^C_dimlinear
\
^C^C_ucs
^C^C_+ucsman 0
^C^C_+ucsman 1
'_dsettings
\
^C^C_dbconnect
^C^C_dbconnect
//
^C^C_lengthen
^C^C_trim
^C^C_extend
^C^C_break
^C^C_chamfer
^C^C_fillet
^C^C_3darray
^C^C_mirror3d
^C^C_rotate3d
\
^C^C_export
^C^C_plot
//  Row X
^C^C_tolerance
^C^C_dimcenter
^C^C_dimangular
^C^C_dimdiameter
^C^C_dimradius
\
^C^C_tablet
^C^C_group
^C^C_qselect
^C^C_find
\
'_adcenter
'_adcenter
//
^C^C_align
^C^C_union
^C^C_subtract
^C^C_intersect
^C^C_xclip
^C^C_xbind
^C^C_imageadjust
^C^C_transparency
^C^C_imageclip
\
^C^C_preview
^C^C_purge
//  Row Y
^C^C_dimedit
^C^C_dimtedit
^C^C_-dimstyle _apply
^C^C_dimoverride
'_dimstyle
\
'_help
^C^C_browser ;
^C^C_menuload
^C^C_options
\
^C^C_properties
^C^C_properties
//
'_matchprop
'_matchprop
^C^C_hatchedit
^C^C_pedit
^C^C_splinedit
^C^C_mledit
^C^C_attedit
^C^C_ddedit
^C^C_explode
\
^C^C_stylesmanager
^C^C_exit
**ENDTAB4

//
//   Where possible the ID name is the AutoCAD command name.
//   An ID is no more than 12 characters long.
//   Long command names are truncated (not abbreviated) to fit.
//   An ID names for a command opion appends the option to the command name:
//
//       Example:  the ID for Zoom Window is ID_ZoomWin
//
//   IDs are listed in alphabetical order.
//   Helps strings end with a colon, two spaces and the name of the command.
//

***HELPSTRINGS
ID_2doptim   [Set viewport to 2D wireframe:  SHADEMODE 2]
ID_3darray   [Creates a three-dimensional array:  3DARRAY]
ID_3dclip    [Starts 3DORBIT and opens the Adjust Clipping Planes window:  3DCLIP]
ID_3dclipbk  [Toggles the back clipping plane on or off in the 3D Orbit Adjust Clipping Planes window:  DVIEW ALL CL B]
ID_3dclipfr  [Toggles the front clipping plane on or off in the 3D Orbit Adjust Clipping Planes window:  DVIEW ALL CL F]
ID_3dcorbit  [Starts the 3DORBIT command with continuous orbit active in the 3D view:  3DCORBIT]
ID_3ddistanc [Starts the 3DORBIT command and makes objects appear closer or farther away:  3DDISTANCE]
ID_3dface    [Creates a three-dimensional face:  3DFACE]
ID_3dmesh    [Creates a free-form polygon mesh:  3DMESH]
ID_3dorbit   [Controls the interactive viewing of objects in 3D:  3DORBIT]
ID_3dpan     [Starts the 3DORBIT command and enables you to drag the view horizontally and vertically:  3DPAN]
ID_3dpoly    [Creates a polyline with straight continuous linetype line segments in three-dimensional space:  3DPOLY]
ID_3dsin     [Imports a 3D Studio file:  3DSIN]
ID_3dsurface [Creates three-dimensional surface objects using a dialog box]
ID_3dswivel  [Starts the 3DORBIT command and simulates the effect of turning the camera:  3DSWIVEL]
ID_3dviews   [Sets the view to a predefined or named view]
ID_3dzoom    [Starts the 3DORBIT command and allows you to zoom in and out on the view:  3DZOOM]
ID_About     [Displays information about AutoCAD:  ABOUT]
ID_Acisin    [Imports an ACIS file:  ACISIN]
ID_AddPlotter [Adds and configures plotters:  (STARTAPP "ADDPLWIZ.EXE")]
ID_AddPlStyle [Creates a plot style table:  (STARTAPP "STYSHWIZ.EXE")]
ID_Ai_box    [Creates a three-dimensional box polygon mesh:  AI_BOX]
ID_Ai_cone   [Creates a cone-shaped polygon mesh:  AI_CONE]
ID_Ai_dish   [Creates the lower half of a spherical polygon mesh:  AI_DISH]
ID_Ai_dome   [Creates the upper half of a spherical polygon mesh:  AI_DOME]
ID_Ai_fms    [Switches to floating model space:  AI_FMS]
ID_Ai_molc   [Makes the layer of a selected object the current layer:  AI_MOLC]
ID_Ai_propch [Controls properties of existing objects:  PROPERTIES]
ID_Ai_pyrami [Creates a pyramid or a tetrahedron:  AI_PYRAMID]
ID_Ai_sphere [Creates a spherical polygon mesh:  AI_SPHERE]
ID_Ai_tiledv [Displays layout options for named viewports:  +VPORTS 1]
ID_Ai_torus  [Creates a toroidal polygon mesh that is parallel to the XY plane of the current UCS:  AI_TORUS]
ID_Ai_wedge  [Creates a right-angle wedge-shaped polygon mesh with the sloped face tapering along the X axis:  AI_WEDGE]
ID_Align     [Aligns objects with other objects in 2D and 3D:  ALIGN]
ID_Appload   [Loads and unloads applications and defines which applications to load at startup:  APPLOAD]
ID_Arc       [Creates an arc:  ARC]
ID_Arc3point [Creates an arc using three points:  ARC]
ID_ArcCeStAn [Creates an arc using the center, start point, and included angle:  ARC]
ID_ArcCeStEn [Creates an arc using the center, start point, and endpoint:  ARC]
ID_ArcCeStLe [Creates an arc using the center, start point, and length of chord:  ARC]
ID_ArcContin [Creates an arc tangent to the last line or arc drawn:  ARC]
ID_ArcStCeAn [Creates an arc using the start point, center, and included angle:  ARC]
ID_ArcStCeEn [Creates an arc using the start point, center, and endpoint:  ARC]
ID_ArcStCeLe [Creates an arc using the start point, center, and length of chord:  ARC]
ID_ArcStEnAg [Creates an arc using the start point, endpoint, and included angle:  ARC]
ID_ArcStEnDi [Creates an arc using the start point, endpoint, and starting direction:  ARC]
ID_ArcStEnRa [Creates an arc using the start point, endpoint, and radius:  ARC]
ID_Area      [Calculates the area and perimeter of objects or of defined areas:  AREA]
ID_Array     [Creates multiple copies of objects in a pattern:  ARRAY]
ID_AttdispNo [Displays visible attributes; hides invisible attributes:  ATTDISP]
ID_AttdispOf [Makes all attributes invisible:  ATTDISP OFF]
ID_AttdispOn [Makes all attributes visible:  ATTDISP ON]
ID_AtteditGlo [Changes attribute information independent of its block definition:  -ATTEDIT]
ID_Audit     [Evaluates the integrity of a drawing:  AUDIT]
ID_AULPLoad  [Loads an AutoLISP application:  APPLOAD]
ID_AULPIDE   [Starts the Visual LISP development environment:  VLISP]
ID_Backgroun [Sets up the background for your scene:  BACKGROUND]
ID_Base      [Sets the insertion base point for the current drawing:  BASE]
ID_Bhatch    [Fills an enclosed area or selected objects with a hatch pattern:  BHATCH]
ID_Bmake     [Creates a block definition from objects you select:  BLOCK]
ID_BodyChk   [Validates a 3D solid object as a valid ACIS solid:  SOLIDEDIT BODY CHECK]
ID_BodyCln   [Removes all reduntant edges and vertices on a solid object:  SOLIDEDIT BODY CLEAN]
ID_Boundary  [Creates a region or a polyline from an enclosed area:  BOUNDARY]
ID_Box       [Creates a three-dimensional solid box:  BOX]
ID_Break     [Erases parts of objects or splits an object in two:  BREAK]
ID_Browser   [Launches the default Web browser defined in your system's registry:  BROWSER]
ID_Chamfer   [Bevels the edges of objects:  CHAMFER]
ID_Camera    [Allows you to set a different camera and target location:  CAMERA]
ID_Cancel	 [Cancels the command]
ID_Circle    [Creates a circle:  CIRCLE]
ID_Circle2pt [Creates a circle using two endpoints of the diameter:  CIRCLE]
ID_Circle3pt [Creates a circle using three points on the circumference:  CIRCLE]
ID_CircleDia [Creates a circle using a specified diameter:  CIRCLE]
ID_CircleRad [Creates a circle using a specified radius:  CIRCLE]
ID_CircleTTR [Creates a circle tangent to two objects with a specified radius:  CIRCLE]
ID_CircleTTT [Creates a circle tangent to three objects:  CIRCLE]
ID_Close     [Closes the drawing file:  CLOSE]
ID_CMNonLast [Repeats the previously issued command]
ID_CMSelLast [Repeats the previously issued command]
ID_Cone      [Creates a three-dimensional solid cone:  CONE]
ID_Config    [Displays the Options dialog box with Printer tab in front:  CONFIG]
ID_Content   [Runs AutoCAD DesignCenter:  ADCENTER]
ID_Copy      [Duplicates the objects you select:  COPY]
ID_Copyclip  [Copies objects to the Clipboard:  COPYCLIP]
ID_Copybase  [Copies objects to the Clipboard with a base point:  COPYBASE]
ID_Copylink  [Copies the current view to the Clipboard for linking to other OLE applications:  COPYLINK]
ID_CreateLayout [Creates a layout using the settings you apply to the wizard:  LAYOUTWIZARD]
ID_CtrlColor [Sets the default color for new objects and edits the color of existing objects]
ID_CtrlLayer [Sets the default layer for new objects, edits the layer of existing objects, and switches between layer properties]
ID_CtrlLinet [Sets the default linetype for new objects and edits the linetype of existing objects]
ID_CtrlLineW [Sets the default lineweight for new objects and edits the lineweight of existing objects]
ID_CtrlPStyl [Sets the default plot style for new objects and edits the plot style of existing objects]
ID_Cutclip   [Copies objects to the Clipboard and erases the objects from the drawing:  CUTCLIP]
ID_Cylinder  [Creates a three-dimensional solid cylinder:  CYLINDER]
ID_Attdef    [Creates an attribute definition:  ATTDEF]
ID_AtteditSin [Edits the variable attributes of a block:  ATTEDIT]
ID_Ddcolor   [Sets the color for new objects:  COLOR]
ID_Ddedit    [Edits text and attribute definitions:  DDEDIT]
ID_Ddim      [Creates and modifies dimension styles:  DIMSTYLE]
ID_Ddinsert  [Inserts a block or another drawing:  INSERT]
ID_Modify    [Controls properties of existing objects:  PROPERTIES]
ID_Ddptype   [Specifies the display style and size of point objects:  DDPTYPE]
ID_Ddrename  [Changes the names of named objects:  RENAME]
ID_Ddrmodes  [Specifies settings for Snap mode, grid, and polar and object snap tracking:  DSETTINGS]
ID_Dducs     [Manages defined user coordinate systems:  +UCSMAN 0]
ID_Dducsp    [Manages defined user coordinate systems:  +UCSMAN 1]
ID_Units     [Controls coordinate and angle display formats and determines precision:  UNITS]
ID_dbConnect [Provides an AutoCAD interface to external database tables:  DBCONNECT]
ID_Ddview    [Creates and restores views:  VIEW]
ID_Ddvpoint  [Sets the three-dimensional viewing direction:  DDVPOINT]
ID_Deselectall [Removes all objects from the selection set:  AI_DESELECT]
ID_Dimaligne [Creates an aligned linear dimension:  DIMALIGNED]
ID_Dimangula [Creates an angular dimension:  DIMANGULAR]
ID_Dimbaseli [Creates a linear, angular, or ordinate dimension from the baseline of the previous dimension or a selected dimension:  DIMBASELINE]
ID_Dimcenter [Creates a center mark for circles and arcs:  DIMCENTER]
ID_Dimcontin [Creates a linear, angular, or ordinate dimension from the second extension line of the previous dimension or a selected dimension:  DIMCONTINUE]
ID_Dimdiamet [Creates a diameter dimension for circles and arcs:  DIMDIAMETER]
ID_Dimedit   [Edits dimensions:  DIMEDIT]
ID_Dimedito  [Makes the extension lines of linear dimensions oblique:  DIMEDIT O]
ID_Dimlinear [Creates linear dimensions:  DIMLINEAR]
ID_Dimordina [Creates ordinate dimensions:  DIMORDINATE]
ID_Dimoverri [Overrides dimension system variables:  DIMOVERRIDE]
ID_DimAbove [Move dimension text above dimension line:  AI_DIM_TEXTABOVE]
ID_DimTxtCen [Moves dimension text to center position:  AI_DIM_TEXTCENTER]
ID_DimHome [Move dimension text back to its default position:  AI_DIM_TEXTHOME]
ID_DimTxtMove2 [Move dimension text alone:  AIDIMTEXTMOVE 2]
ID_DimTxtMove1 [Move dimension text with leader:  AIDIMTEXTMOVE 1]
ID_DimTxtMove0 [Moves dimension text with dimension line:  AIDIMTEXTMOVE 0]
ID_DimPrec0 [Sets the dimension value to 0 decimal places:  AIDIMPREC 0]
ID_DimPrec1 [Sets the dimension value to 1 decimal place:  AIDIMPREC 1]
ID_DimPrec2 [Sets the dimension value to 2 decimal places:  AIDIMPREC 2]
ID_DimPrec3 [Sets the dimension value to 3 decimal places:  AIDIMPREC 3]
ID_DimPrec4 [Sets the dimension value to 4 decimal places:  AIDIMPREC 4]
ID_DimPrec5 [Sets the dimension value to 5 decimal places:  AIDIMPREC 5]
ID_DimPrec6 [Sets the dimension value to 6 decimal places:  AIDIMPREC 6]
ID_DimSty2 [Saves the properties of the selected dimension as a new dimension style:  AIDIMSTYLE S]
ID_DimSty3 [Assigns the style to the selected dimension(s)]
ID_DimSty4 [Assigns the style to the selected dimension(s)]
ID_DimSty5 [Assigns the style to the selected dimension(s)]
ID_DimSty6 [Assigns the style to the selected dimension(s)]
ID_DimSty7 [Assigns the style to the selected dimension(s)]
ID_DimSty8 [Assigns the style to the selected dimension(s)]
ID_DimSty9 [Displays other available dimension styles:  AIDIMSTYLE O]
ID_Dimradius [Creates radius dimensions for circles and arcs:  DIMRADIUS]
ID_DimstyleA [Updates dimensions so they use the most current dimension style settings:  -DIMSTYLE APPLY]
ID_Dimtedit  [Moves and rotates dimension text :  DIMTEDIT]
ID_DimteditA [Rotates dimension text to an angle:  DIMTEDIT]
ID_DimteditC [Centers dimension text:  DIMTEDIT]
ID_DimteditH [Moves dimension text back to its default position:  DIMTEDIT]
ID_DimteditL [Left justifies dimension text:  DIMTEDIT]
ID_DimteditR [Right justifies dimension text:  DIMTEDIT]
ID_DimUpdate [Updates the style of a dimension:  DIMSTYLE APPLY]
ID_QDim      [Quickly create dimension arrangements:  QDIM]
ID_Dist      [Measures the distance and angle between two points:  DIST]
ID_Divide    [Places evenly spaced point objects or blocks along the length or perimeter of an object:  DIVIDE]
ID_Donut     [Draws filled circles and rings:  DONUT]
ID_DrawordeA [Forces selected objects to be displayed in front of a reference object:  (AI_DRAWORDER "A")]
ID_DrawordeB [Forces selected objects to be displayed behind all other objects:  (AI_DRAWORDER "B")]
ID_DrawordeF [Forces selected objects to be displayed in front of all other objects:  (AI_DRAWORDER "F")]
ID_Draworder [Changes the display order of images and other objects:  DRAWORDER]
ID_DrawordeU [Forces selected objects to be displayed behind a reference object:  (AI_DRAWORDER "U")]
ID_Dsviewer  [Opens the Aerial View window:  DSVIEWER]
ID_Dtext     [Displays text on screen as it is entered:  DTEXT]
ID_Dxbin     [Imports specially coded binary files:  DXBIN]
ID_Edge      [Changes the visibility of three-dimensional face edges:  EDGE]
ID_EdgeColor [Changes the color of individual edges on a solid object:  SOLIDEDIT EDGE COLOR]
ID_EdgeCopy  [Copies 3D edges on a solid object as an arc, circle, ellipse, line, or spline:  SOLIDEDIT EDGE COPY]
ID_Edgesurf  [Creates a three-dimensional polygon mesh:  EDGESURF]
ID_Ellipse   [Creates an ellipse or an elliptical arc:  ELLIPSE]
ID_EllipseAx [Creates an ellipse or an elliptical arc:  ELLIPSE]
ID_EllipseCe [Creates an ellipse using a center point:  ELLIPSE C]
ID_EllipseAr [Creates an elliptical arc:  ELLIPSE A]
ID_Enter     [Issues Enter]
ID_Erase     [Removes objects from a drawing:  ERASE]
ID_Explode   [Breaks a compound object into its component objects:  EXPLODE]
ID_Export    [Saves objects to other file formats:  EXPORT]
ID_Extend    [Extends an object to meet another object:  EXTEND]
ID_Extrude   [Creates unique solid primitives by extruding existing two-dimensional objects:  EXTRUDE]
ID_FaceExtru [Extrudes selected faces on a solid object to a specified height or along a path:  SOLIDEDIT FACE EXTRUDE]
ID_FaceMove  [Moves selected faces on a solid object to a specified height or distance:  SOLIDEDIT FACE MOVE]
ID_FaceOffse [Equally offsets faces on a solid object by a specified distance or point:  SOLIDEDIT FACE OFFSET]
ID_FaceDel   [Deletes or removes faces, including fillets or chamfers on a solid object:  SOLIDEDIT FACE DELETE]
ID_FaceRotat [Rotates one or more faces on a solid object around a specified axis:  SOLIDEDIT FACE ROTATE]
ID_FaceTaper [Tapers faces on a solid object with a specified angle:  SOLIDEDIT FACE TAPER]
ID_FaceColor [Changes the color of individual faces on a solid object:  SOLIDEDIT FACE COLOR]
ID_FaceCopy  [Copies faces on a solid object as a region or a solid body:  SOLIDEDIT FACE COPY]
ID_Fillet    [Rounds and fillets the edges of objects:  FILLET]
ID_Filter	 [Quickly creates selection sets based on filtering criteria:  QSELECT]
ID_Flat      [Set viewport to flat shaded:  SHADEMODE F]
ID_FlatEdges [Set viewport to flat shaded, edges on:  SHADEMODE L]
ID_Fog       [Provides visual cues for the apparent distance of objects:  FOG]
ID_From      [Offsets from a temporary reference point:  FROM]
ID_GotoURL   [Loads the Web browser and searches for the location embedded in the selected object:  GOTOURL]
ID_Gouraud   [Set viewport to Gouraud shaded:  SHADEMODE G] 
ID_GourEdges [Set viewport to Gouraud shaded, edges on:  SHADEMODE O]
ID_GripBase  [Sets the insertion base point for the current drawing:  BASE]
ID_GripCopy  [Duplicates objects:  COPY]
ID_GripExit  [Cancels grip edit mode and returns to the command line:  EXIT]
ID_GripMirro [Creates a mirror image copy of objects:  MIRROR]
ID_GripMove  [Displaces objects a specified distance in a specified direction:  MOVE]
ID_GripRefer [Sets the reference point:  REFERENCE]
ID_GripRotat [Moves objects about a base point:  ROTATE]
ID_GripScale [Enlarges or reduces selected objects equally in the X, Y, and Z directions:  SCALE]
ID_GripStret [Moves or stretches objects:  STRETCH]
ID_GripUndo  [Reverses the most recent operation:  U]
ID_Group     [Creates a named selection set of objects:  GROUP]
ID_Hatchedit [Modifies an existing hatch object:  HATCHEDIT]
ID_Help      [Displays online help:  HELP]
ID_Hidden    [Set viewport to hidden line:  SHADEMODE H]
ID_Hide      [Regenerates a three-dimensional model with hidden lines suppressed:  HIDE]
ID_HlnkBack  [Navigates to the previous hyperlinked document:  'HYPERLINKBACK]
ID_HlnkFwd   [Navigates to the next hyperlinked document:  'HYPERLINKFWD]
ID_HlnkStop  [Cancels the current navigation selection:  'HYPERLINKSTOP]
ID_Hyperlink [Attaches a hyperlink to a graphical object or modifies an existing hyperlink:  HYPERLINK]
ID_Id        [Displays the coordinate values of a location:  ID]
ID_Image     [Inserts images in many formats into an AutoCAD drawing file:  IMAGE]
ID_Imageatta [Attaches a new image to the current drawing:  IMAGEATTACH]
ID_Imageadju [Controls the image display of the brightness, contrast, and fade values of images:  IMAGEADJUST]
ID_Imageclip [Creates new clipping boundaries for an image object:  IMAGECLIP]
ID_Imagefram [Controls whether AutoCAD displays the image frame or hides it from view:  IMAGEFRAME]
ID_Imagequal [Controls the display quality of images:  IMAGEQUALITY]
ID_Import    [Imports files in various formats into AutoCAD:  IMPORT]
ID_ImpPlotSet [Displays a wizard to import PCP and PC2 configuration file plot settings into the Model tab or current layout:  PCINWIZARD]
ID_Imprint   [Imprints geometry on a face of a solid object:  SOLIDEDIT BODY IMPRINT]
ID_Insertobj [Inserts a linked or embedded object:  INSERTOBJ]
ID_Interfere [Creates a composite 3D solid from the common volume of two or more solids:  INTERFERE]
ID_Intersect [Creates solids or regions from the intersection of solids or regions:  INTERSECT]
ID_L_acla    [Starts Learning Assistance:  (STARTAPP (FINDFILE "ALALINK.EXE"))]
ID_Layer     [Manages layers and layer properties:  LAYER]
ID_LayoutWiz [Starts the Layout wizard to designate page and plot settings for a new layout:  LAYOUTWIZARD]
ID_Leader    [Quickly creates a leader and leader annotation:  QLEADER]
ID_Lengthen  [Lengthens an object:  LENGTHEN]
ID_Light     [Manages lights and lighting effects:  LIGHT]
ID_Limits    [Sets and controls the drawing boundaries:  LIMITS]
ID_Line      [Creates straight line segments:  LINE]
ID_Linetype  [Creates, loads, and sets linetypes:  LINETYPE]
ID_Linewt    [Sets the current lineweight, lineweight display options, and lineweight units:  LWEIGHT]
ID_Links     [Updates, changes, and cancels existing OLE links:  OLELINKS]
ID_List      [Displays database information for selected objects:  LIST]
ID_Lsnew     [Adds realistic landscape items, such as trees and bushes, to your drawings:  LSNEW]
ID_Lsedit    [Edits a landscape object:  LSEDIT]
ID_Lslib     [Maintains libraries of landscape objects:  LSLIB]
ID_Massprop  [Calculates and displays the mass properties of regions or solids:  MASSPROP]
ID_Matchprop [Copies the properties from one object to one or more objects:  MATCHPROP]
ID_Matlib    [Imports and exports materials to and from a library of materials:  MATLIB]
ID_Measure   [Places point objects or blocks at measured intervals on an object:  MEASURE]
ID_Menuload  [Loads partial menu files:  MENULOAD]
ID_Mirror    [Creates a mirror image copy of objects:  MIRROR]
ID_Mirror3d  [Creates a mirror image copy of objects about a plane:  MIRROR3D]
ID_Mledit    [Edits multiple parallel lines:  MLEDIT]
ID_Mline     [Creates multiple parallel lines:  MLINE]
ID_Mlstyle   [Manages styles for multiple parallel lines:  MLSTYLE]
ID_Move      [Displaces objects a specified distance in a specified direction:  MOVE]
ID_MRU       [Opens this drawing]
ID_Mtext     [Creates multiline text:  MTEXT]
ID_Mtedit    [Opens the Mulitline Text Editor for the selected mtext object:  MTEDIT]
ID_New       [Creates a new drawing file:  NEW]
ID_NewLayout [Creates a new layout with page settings and plotting device information:  LAYOUT]
ID_Offset    [Creates concentric circles, parallel lines, and parallel curves:  OFFSET]
ID_Open      [Opens an existing drawing file:  OPEN]
ID_Osnap     [Sets running object snap modes:  +DSETTINGS 2]
ID_OsnapAppa [Snaps to the apparent intersection of two objects:  APPINT]
ID_OsnapCent [Snaps to the center of an arc or a circle:  CEN]
ID_OsnapEndp [Snaps to the closest endpoint of an arc or a line:  ENDP]
ID_OsnapExte [Snaps to the phantom extension of an arc or line:  EXT]
ID_OsnapInse [Snaps to the insertion point of text, a block, a shape, or an attribute:  INS]
ID_OsnapInte [Snaps to the intersection of a line, an arc, or a circle:  INT]
ID_OsnapMidp [Snaps to the midpoint of an arc or a line:  MID]
ID_OsnapNear [Snaps to the nearest point of an arc, a circle, a line, or a point:  NEA]
ID_OsnapNode [Snaps to a point object:  NOD]
ID_OsnapNone [Turns off Object Snap mode:  NON]
ID_OsnapPara [Snaps parallel to a specified line:  PAR]
ID_OsnapPerp [Snaps to a point perpendicular to an arc, a line, or a circle:  PER]
ID_OsnapQuad [Snaps to a quadrant point of an arc or a circle:  QUA]
ID_OsnapTang [Snaps to the tangent of an arc or a circle:  TAN]
ID_Pan       [Moves the drawing display in the current viewport:  PAN]
ID_PanDown   [Moves the drawing down:  PAN]
ID_PanLeft   [Moves the drawing to the left:  PAN]
ID_PanPick   [Moves the view of the drawing by the specified distance:  -PAN]
ID_PanRight  [Moves the drawing to the right:  PAN]
ID_PanUp     [Moves the drawing up:  PAN]
ID_PartialOp [Loads additional geometry into a partially opened drawing:  PARTIALOAD]
ID_Pasteclip [Inserts data from the Clipboard:  PASTECLIP]
ID_Pastebloc [Pastes objects from the Clipboard as a block:  PASTEBLOCK]
ID_Pastehlnk [Pastes a hyperlink to the selected object:  PASTEASHYPERLINK]
ID_Pasteorig [Pastes objects to the same coordinates as in the original drawing:  PASTEORIG]
ID_Pastesp   [Inserts data from the Clipboard and controls the format of the data:  PASTESPEC]
ID_Pedit     [Edits polylines and three-dimensional polygon meshes:  PEDIT]
ID_PenSetting [Creates a color-dependent plot style table:  R14PENWIZARD]
ID_PlanCurre [Displays the plan view of a user coordinate system:  PLAN]
ID_PlanUCS   [Displays the plan view of a previously saved user coordinate system:  PLAN U]
ID_PlanWorld [Displays the plan view of the World Coordinate System:  PLAN W]
ID_Pline     [Creates two-dimensional polylines:  PLINE]
ID_PlotStyle [Sets the current plot style for new objects, or the assigned plot style for selected objects:  PLOTSTYLE]
ID_Point     [Creates a point object:  POINT]
ID_PlotMgr   [Provides access to the Add Plotter wizard and the Plotter Configuration Editor:  PLOTTERMANAGER]
ID_PlotStyMgr [Provides access to the Add Plot Style Table wizard and the Plot Style Table Editor:  STYLESMANAGER]
ID_PointFilx [Specifies a .X point filter:  .X]
ID_PointFily [Specifies a .Y point filter:  .Y]
ID_PointFilz [Specifies a .Z point filter:  .Z]
ID_PointFixy [Specifies a .XY point filter:  .XY]
ID_PointFixz [Specifies a .XZ point filter:  .XZ]
ID_PointFiyz [Specifies a .YZ point filter:  .YZ]
ID_PointMult [Creates multiple points:  POINT]
ID_PointSing [Creates a single point:  POINT]
ID_Polygon   [Creates an equilateral closed polyline:  POLYGON]
ID_Preferenc [Customizes the AutoCAD settings:  OPTIONS]
ID_PlotHelp  [Displays step-by-step instructions and video animations for plotting]
ID_PlotSetup [Displays the Page Setup dialog box:  PAGESETUP]
ID_Preview   [Shows how the drawing will look when it is printed or plotted:  PREVIEW]
ID_Print     [Plots a drawing to a plotting device or file:  PLOT]
ID_Props     [Sets and displays the properties of the current drawing:  DWGPROPS]
ID_PurgeAll  [Removes all unused objects from the drawing database:  PURGE]
ID_PurgeBlk  [Removes unused blocks from the drawing database:  PURGE]
ID_PurgeDim  [Removes unused dimension styles from the drawing database:  PURGE]
ID_PurgeLay  [Removes unused layers from the drawing database:  PURGE]
ID_PurgeLin  [Removes unused linetypes from the drawing database:  PURGE]
ID_PurgeMln  [Removes unused multiline styles from the drawing database:  PURGE]
ID_PurgePlt  [Purges the plot styles you specify by name:  PURGE]
ID_PurgeShp  [Removes unused shapes from the drawing database:  PURGE]
ID_PurgeTxt  [Removes unused text styles from the drawing database:  PURGE]
ID_Save      [Quickly saves the current drawing:  QSAVE]
ID_Qselect   [Quickly creates selection sets based on filtering criteria:  QSELECT]
ID_Ray       [Creates a semi-infinite line:  RAY]
ID_Recover   [Repairs a damaged drawing:  RECOVER]
ID_Rectang   [Draws a rectangular polyline:  RECTANG]
ID_Redo      [Reverses the effects of the previous UNDO or U command:  REDO]
ID_Redrawall [Refreshes the display of all viewports:  REDRAWALL]
ID_Regen     [Regenerates the drawing and refreshes the current viewport:  REGEN]
ID_Regenall  [Regenerates the drawing and refreshes all viewports:  REGENALL]
ID_Region    [Creates a region object from a selection set of existing objects:  REGION]
ID_Render    [Creates a photorealistic or realistically shaded image of a three-dimensional wireframe or solid model :  RENDER]
ID_Replay    [Displays a BMP, TGA, or TIFF image:  REPLAY]
ID_Revolve   [Creates a solid by revolving a two-dimensional object about an axis:  REVOLVE]
ID_Revsurf   [Creates a revolved surface about a selected axis:  REVSURF]
ID_Rmat      [Manages rendering materials:  RMAT]
ID_Rotate    [Moves objects about a base point:  ROTATE]
ID_Rotate3d  [Moves objects about a three-dimensional axis:  ROTATE3D]
ID_Rpref     [Sets rendering preferences:  RPREF]
ID_Rulesurf  [Creates a ruled surface between two curves:  RULESURF]
ID_Saveas    [Saves an unnamed drawing with a file name or renames the current drawing:  SAVEAS]
ID_Saveimg   [Saves a rendered image to a file:  SAVEIMG]
ID_Scale     [Enlarges or reduces objects equally in the X, Y, and Z directions:  SCALE]
ID_Scene     [Manages scenes in model space:  SCENE]
ID_Script    [Executes a sequence of commands from a script:  SCRIPT]
ID_Section   [Uses the intersection of a plane and solids to create a region:  SECTION]
ID_SendMail  [Faxes or emails the current drawing file]
ID_Separate  [Separates 3D solid objects with disjointed volumes into independent 3D solid objects:  SOLIDEDIT BODY SEPARATE]
ID_Setuv     [Maps materials onto objects:  SETUV]
ID_Setvar    [Lists or changes the values of system variables:  SETVAR]
ID_Shell     [Creates a hollow, thin wall with a specified thickness on a solid object:  SOLIDEDIT BODY SHELL]
ID_Slice     [Slices a set of solids with a plane:  SLICE]
ID_Soldraw   [Generates profiles and sections in viewports created with the SOLVIEW command:  SOLDRAW]
ID_Solid     [Creates solid-filled polygons:  SOLID]
ID_Solprof   [Creates profile images of three-dimensional solids:  SOLPROF]
ID_Solview   [Creates floating viewports using orthographic projection to lay out multi- and sectional view drawings of 3D solid and body objects:  SOLVIEW]
ID_Spell     [Checks spelling in a drawing:  SPELL]
ID_Sphere    [Creates a three-dimensional solid sphere:  SPHERE]
ID_Spline    [Creates a quadratic or cubic spline (NURBS) curve:  SPLINE]
ID_Splinedit [Edits a spline object:  SPLINEDIT]
ID_Stats     [Displays rendering statistics:  STATS]
ID_Status    [Displays drawing statistics, modes, and extents:  STATUS]
ID_Stretch   [Moves or stretches objects:  STRETCH]
ID_Style     [Creates or modifies named styles and sets the current style for text in your drawing:  STYLE]
ID_Subtract  [Creates a composite region or solid by subtraction:  SUBTRACT]
ID_Support   [Provides AutoCAD 2000 support resources:  (HELP "ASA_MAIN.HLP" "CONTENTS")]
ID_TabletCal [Calibrates the digitizer with the drawing's coordinate system:  TABLET CAL]
ID_TabletCfg [Designates or realigns the tablet menu areas:  TABLET CFG]
ID_TabletOff [Turns Tablet mode off:  TABLET OFF]
ID_TabletOn  [Turns Tablet mode on:  TABLET ON]
ID_Tabsurf   [Creates a tabulated surface from a path curve and a direction vector:  TABSURF]
ID_TbDimensi [Dimension toolbar]
ID_TbDraw    [Draw toolbar]
ID_TbExtdb   [External Database toolbar]
ID_TbInquiry [Inquiry toolbar]
ID_TbInsert  [Insert toolbar]
ID_TbModify  [Modify toolbar]
ID_TbObjectP [Object Properties toolbar]
ID_TbOsnap   [Object Snap toolbar]
ID_TbOrbit   [Orbit Toolbar]
ID_TbRender  [Render toolbar]
ID_TbShading [Shade Toolbar]
ID_TbSolids  [Solids toolbar]
ID_TbSolids2 [Solids Editing toolbar]
ID_TbModifII [Modify II toolbar]
ID_TbReferen [Reference Toolbar]
ID_TbStandar [Standard toolbar]
ID_TbSurface [Surfaces toolbar]
ID_TbUcs     [UCS toolbar]
ID_TbUcsName [UCS II toolbar]
ID_TbViewpoi [Viewpoint toolbar]
ID_TbZoom    [Zoom toolbar]
ID_TextFind  [Finds, replaces, selects, or zooms to specified text:  FIND]
ID_Textscr   [Opens the AutoCAD text window:  TEXTSCR]
ID_Thickness [Sets the current 3D thickness:  THICKNESS]
ID_Time      [Displays the date and time statistics of a drawing:  TIME]
ID_TmplLayou [Inserts a new layout based on an existing layout template:  LAYOUT TEMPLATE]
ID_Tolerance [Creates geometric tolerances:  TOLERANCE]
ID_Toolbar   [Displays, hides, and customizes toolbars:  TOOLBAR]
ID_Torus     [Creates a donut-shaped solid:  TORUS]
ID_Tracking  [Creates a temporary point used by Osnaps:  TT]
ID_Transpare [Controls whether background pixels in an image are transparent or opaque:  TRANSPARENCY]
ID_Trim      [Trims objects at a cutting edge defined by other objects:  TRIM]
ID_U         [Reverses the most recent operation:  U]
ID_Ucs       [Manages user coordinate systems:  UCS]
ID_Ucs3point [Specifies the new UCS origin and the direction of the X and Y axes:  UCS 3]
ID_UcsBack   [Specifies the Back UCS orientation:  UCS G BA]
ID_UcsBottom [Specifies the Bottom UCS orientation:  UCS G B]
ID_UcsFront  [Specifies the Front UCS orientation:  UCS G F]
ID_UcsiconOn [Controls the visibility and placement of the UCS icon:  UCSICON]
ID_UcsiconOr [Forces the icon to appear at the origin of the current coordinate system:  UCSICON]
ID_UcsLeft   [Specifies the Left UCS orientation:  UCS G L]
ID_UcsMove   [Moves the defined UCS:  UCS MOVE]
ID_UcsObject [Defines a new coordinate system based on a selected object:  UCS OB]
ID_UcsFace   [Defines a new coordinate system based on a selected face:  UCS FA]
ID_UcsOrigin [Defines a new UCS by shifting the origin:  UCS O]
ID_UcsPrevio [Restores the previous UCS:  UCS P]
ID_UcsRight  [Specifies the Right UCS orientation:  UCS G R]
ID_UcsTop    [Specifies the Top UCS orientation:  UCS G T]
ID_UcsView   [Establishes a new coordinate system with the XY plane parallel to the screen:  UCS V]
ID_UcsWorld  [Sets the UCS to the World Coordinate System:  UCS W]
ID_UcsXAxRot [Rotates the current UCS about the X axis:  UCS X]
ID_UcsYAxRot [Rotates the current UCS about the Y axis:  UCS Y]
ID_UcsZAxRot [Rotates the current UCS about the Z axis:  UCS Z]
ID_UcsZAxVec [Defines a UCS using a positive Z axis extrusion method:  UCS ZAXIS]
ID_UcsApply  [Applies current UCS to a selected viewport:  UCS APPLY]
ID_Union     [Creates a composite region or solid by addition:  UNION]
ID_VBARun    [Runs a VBA macro:  VBARUN]
ID_VBAMan    [Loads, unloads, saves, creates, embeds, and extracts VBA projects:  VBAMAN]
ID_VBALoad   [Loads a global VBA project into the current AutoCAD session:  VBALOAD]
ID_VBAIDE    [Displays the Visual Basic Editor:  VBAIDE]
ID_VpointBac [Sets the view point to back:  VIEW BACK]
ID_VpointBot [Sets the view point to bottom:  VIEW BOTTOM]
ID_VpointFro [Sets the view point to front:  VIEW FRONT]
ID_VpointLef [Sets the view point to left:  VIEW LEFT]
ID_VpointNE  [Sets the view point to northeast isometric:  VIEW NEISO]
ID_VpointNW  [Sets the view point to northwest isometric:  VIEW NWISO]
ID_VpointRig [Sets the view point to right:  VIEW RIGHT]
ID_VpointSE  [Sets the view point to southeast isometric:  VIEW SEISO]
ID_VpointSW  [Sets the view point to southwest isometric:  VIEW SWISO]
ID_VpointTop [Sets the view point to top:  VIEW TOP]
ID_VpointTri [Displays a compass and tripod for defining a view direction in model space:  VPOINT]
ID_VportClip [Clips viewport objects:  VPCLIP]
ID_Vports2   [Divides the current viewport in half:  -VPORTS 2]
ID_Vports3   [Divides the current viewport into three viewports:  -VPORTS 3]
ID_Vports4   [Divides the current viewport into four viewports of equal size:  -VPORTS 4]
ID_VportsDel [Specifies a closed polyline, ellipse, spline, region, or circle to convert into a viewport:  -VPORTS O]
ID_VportsJoi [Combines two adjacent viewports into one larger viewport:  -VPORTS J]
ID_VportsRes [Creates an irregularly shaped viewport defined by specifying points:  -VPORTS P]
ID_VportsSav [Opens a new viewport using a specified name:  +VPORTS 0]
ID_VportsSin [Returns the drawing to a single viewport view, using the view from the active viewport:  VPORTS]
ID_Vport_dispon  [Turns on a viewport, making it active and making its objects visible:  -VPORTS ON P]
ID_Vport_dispoff [Turns off a viewport, making its objects invisible:  -VPORTS OFF P]
ID_Vport_lockon  [Locks the current viewport. This is similar to layer locking:  -VPORTS LOCK ON P]
ID_Vport_lockoff [Unlocks the current viewport:  -VPORTS LOCK OFF P]
ID_Vport_hideon  [Removes hidden lines from a viewport during plotting from paper space:  -VPORTS HIDE ON P]
ID_Vport_hideoff [Disables the ability to remove hidden lines from a viewport during plotting:  -VPORTS HIDE OFF P]
ID_Wedge     [Creates a 3D solid with a sloped face tapering along the X axis:  WEDGE]
ID_Wireframe [Set viewport to 3D wireframe:  SHADEMODE 3]
ID_Wnew      [Shows new AutoCAD features:  (HELP "ACAD_UG" "WHATSNEW")]
ID_Wmfin     [Imports a Windows metafile:  WMFIN]
ID_Xattach   [Attaches an external reference to the current drawing:  XATTACH]
ID_Xbind     [Binds individual dependent symbols of an xref to a drawing:  XBIND]
ID_Xclip     [Defines an xref or block clipping boundary and sets the front or back clipping planes:  XCLIP]
ID_Xclipfram [Controls the visibility of the xref clipping boundaries:  XCLIPFRAME]
ID_Xline     [Creates an infinite line:  XLINE]
ID_Xref      [Controls external references to drawing files:  XREF]
ID_XrefClip  [Defines an xref or block clipping boundary and sets the front or back clipping planes:  XCLIP]
ID_ZoomAll   [Zooms to display the entire drawing in the current viewport:  ZOOM ALL]
ID_ZoomCente [Displays a window specified by a center point and height:  ZOOM C]
ID_ZoomDynam [Zooms to display the generated portion of the drawing:  ZOOM D]
ID_ZoomExten [Zooms to display the drawing extents:  ZOOM E]
ID_ZoomIn    [Increases the apparent size of objects in the current viewport:  ZOOM 2X]
ID_ZoomOut   [Decreases the apparent size of objects in the current viewport:  ZOOM .5X]
ID_ZoomPrevi [Zooms to display the previous view:  ZOOM P]
ID_ZoomRealt [Zooms in realtime:  ZOOM]
ID_ZoomScale [Zooms with a specified scale factor:  ZOOM S]
ID_ZoomWindo [Zooms to display an area specified by a rectangular window:  ZOOM W]
ID_TbRefedit [Reference Edit Toolbar]
ID_RefAdd    [Transfers objects from the host drawing to the REFEDIT working set:  REFSET ADD]
ID_RefRemove [Transfers objects from the REFEDIT working set to the host drawing:  REFSET REM]
ID_RefDscrd  [Discards REFEDIT working set changes:  REFCLOSE DISC]
ID_RefSave   [Saves REFEDIT working set changes:  REFCLOSE SAV]
ID_RefEditor [Selects a block or xref for in-place editing:  REFEDIT]
ID_TbLayouts [Layouts Toolbar]
ID_LayNew    [Creates a new layout with page settings and plotting device information:  -LAYOUT N]
ID_TbVpCreat [Viewport Creation Toolbar]
ID_VpDialog  [Displays the Viewports dialog:  VPORTS]
ID_VpSingle  [Creates a single paperspace viewport:  -VPORTS SI]
ID_VpPoly    [Creates an irregularly shaped viewport using specified points:  -VPORTS P]
ID_VpConvert [Converts an object to a paperspace viewport:  -VPORTS O]
ID_VpClip    [Clips a paperspace viewport:  VPCLIP]
ID_LayTemp	 [Displays the Select File dialog box from which to select an existing template to base the new layout:  -LAYOUT T]
ID_VPScale	 [Sets the viewport scale for new viewports and edits the viewport scale of existing viewports]
ID_UcsCombo	 [Changes the UCS]
ID_ACHomePage  [Displays the AutoCAD Web site in the default browser:  BROWSER HTTP://WWW.AUTODESK.COM/PRODUCTS/AUTOCAD/INDEX.HTM]
ID_PlugIn      [Displays the AutoCAD Plugins Web site in the default browser:  BROWSER HTTP://WWW.CADPLUGINS.COM]
ID_TechPubs    [Displays the Autodesk Technical Publications Web site in the default browser:  BROWSER HTTP://WWW.AUTODESK.COM/TECHPUBS/AUTOCAD]
ID_ADHomePage  [Displays the Autodesk Web site in the default browser:  BROWSER HTTP://WWW.AUTODESK.COM]
ID_ProdSupp    [Displays the Autodesk Product Support Web site in the default browser:  BROWSER HTTP://WWW.AUTODESK.COM/SUPPORT]
ID_DevRes      [Displays the Autodesk Resource Guide Online Web site in the default browser:  BROWSER HTTP://WWW.ARGONLINE.COM]
ID_AUGI        [Displays the AUGI website in the default browser:  _BROWSER (FINDFILE "AUGI.HTM")]

//
//  Keyboard Accelerators
//
//  If a keyboard accelerator is preceded by an ID string that references a menu item
//  in a pull-down menu, then the keyboard accelerator will run the command referenced
//  by that menu item.
//
***ACCELERATORS
// Bring up hyperlink dialog
ID_Hyperlink [CONTROL+"K"]
// Toggle Orthomode
[CONTROL+"L"]^O
// Next Viewport
[CONTROL+"R"]^V
ID_Copyclip  [CONTROL+"C"]
ID_New       [CONTROL+"N"]
ID_Open      [CONTROL+"O"]
ID_Print     [CONTROL+"P"]
ID_Save      [CONTROL+"S"]
ID_Pasteclip [CONTROL+"V"]
ID_Cutclip   [CONTROL+"X"]
ID_Redo      [CONTROL+"Y"]
ID_U         [CONTROL+"Z"]
ID_Modify    [CONTROL+"1"]
ID_Content   [CONTROL+"2"]
ID_dbConnect [CONTROL+"6"]
ID_VBARun    [ALT+"F8"]
ID_VBAIDE    [ALT+"F11"]